C. Liew

PROFILE

Homepage
No homepage is listed.
ORCID
No ORCID is listed.
Affiliations
No affiliations are listed.
Aliases
Celine V. Liew, Celine Liew, C V Liew, Celine V Liew, C.v. Liew, C. V. Liew, Celine Valeria Liew
Publication record
98 papers · 2,674 citations · H-index 27

PAPERS

Magnesium Stearate Fatty Acid Composition, Lubrication Performance and Tablet Properties
20249 citationsauthor #3
Functionality of wet-granulated disintegrant in comparison to directly incorporated disintegrant in a poorly water-soluble tablet matrix.
20248 citationsauthor #4
Correction to "Understanding the Roles of Excipients in Moisture Management in Solid Dosage Forms".
20241 citationsauthor #3
Understanding the Roles of Excipients in Moisture Management in Solid Dosage Forms.
20246 citationsauthor #3
Surface Modification of lactose carrier particles using a fluid bed coater to improve fine particle fraction for dry powder inhalers
20233 citationsauthor #7
Impact of magnesium stearate physical and chemical variabilities on pharmaceutical powder flow and tablet physical properties
20237 citationsauthor #5
Ensuring Product Stability - Choosing the Right Excipients.
202219 citationsauthor #3
Relative Humidity Cycling: Implications on the Stability of Moisture-Sensitive Drugs in Solid Pharmaceutical Products.
202215 citationsauthor #3
Impact of Amylose-Amylopectin Ratio of Starches on the Mechanical Strength and Stability of Acetylsalicylic Acid Tablets
20229 citationsauthor #2
Alginate-based matrix tablets for drug delivery
202216 citationsauthor #3
Workshop Report: USP Workshop on Advancements in In Vitro Performance Testing of Drug Products
20204 citationsauthor #19
Investigation on the effect of roller compaction on paracetamol
20205 citationsauthor #3
A Study on The Formulation of Plant Matrix Tablets From Coarse Botanical Materials Using Cinnamon Bark and Areca Nut as The Model Botanical Materials
20203 citationsauthor #4
Insights into the Moisture Scavenging Properties of Different Types of Starch in Tablets Containing a Moisture-Sensitive Drug.
202011 citationsauthor #3
Impact of Die Wall Material on the Mechanical Properties of Paracetamol Tablets.
20193 citationsauthor #3
The Effects of Feed Frame Parameters and Turret Speed on Mini-Tablet Compression.
201921 citationsauthor #3
Effects of Particle Surface Roughness on In-Die Flow and Tableting Behavior of Lactose.
201921 citationsauthor #3
AY1920 Semester 1 Postgraduate Seminar
20190 citationsauthor #7
Influence of spray nozzle aperture during high shear wet granulation on granule properties and its compression attributes
201820 citationsauthor #4
Comparative evaluation of powder flow parameters with reference to particle size and shape
2018116 citationsauthor #3
Understanding effects of process parameters and forced feeding on die filling
201825 citationsauthor #3
Dissolution of fine particle fraction from truncated Anderson cascade impactor with an enhancer cell
201814 citationsauthor #2
Equilibria, kinetics and mechanism for the degradation of the cytotoxic compound L-NG-nitroarginine
20180 citationsauthor #3
Investigation on the impact of powder arching in small die filling
20186 citationsauthor #3
Evaluation of tablet punch configuration on mitigating capping by a quality by design approach
20176 citationsauthor #5
Role of dwell on compact deformation during tableting: an overview
20170 citationsauthor #2
Influence of the Punch Head Design on the Physical Quality of Tablets Produced in a Rotary Press.
201721 citationsauthor #3
Role of dwell on compact deformation during tableting: an overview
201717 citationsauthor #2
Tablet compression tooling - Impact of punch face edge modification.
20175 citationsauthor #3
Understanding die fill variation during mini-tablet production.
201729 citationsauthor #3
Microcrystalline cellulose: An overview
20171 citationsauthor #2
Review of Disintegrants and the Disintegration Phenomena.
2016298 citationsauthor #2
Powder Flow Testing: Judicious Choice of Test Methods
201645 citationsauthor #2
Formulation and process strategies to minimize coat damage for compaction of coated pellets in a rotary tablet press: A mechanistic view.
201629 citationsauthor #3
Cluster formation and drag reduction-proposed mechanism of particle recirculation within the partition column of the bottom spray fluid-bed coater.
20152 citationsauthor #3
Impact Of Excipient Variability On Drug Product Processing And Performance.
201513 citationsauthor #2
Impact of Electrostatics on Processing and Product Performance of Pharmaceutical Solids.
20154 citationsauthor #3
Continuous manufacturing: the future in pharmaceutical solid dosage form manufacturing
201511 citationsauthor #4
Influence of rate of force application during compression on tablet capping.
201518 citationsauthor #3
Evaluation of the coat quality of sustained release pellets by individual pellet dissolution methodology.
201522 citationsauthor #2
Particle Surface Roughness – Its Characterisation and Impact on Dry Powder Inhaler Performance
201512 citationsauthor #2
Evaluation of coat uniformity and taste-masking efficiency of irregular-shaped drug particles coated in a modified tangential spray fluidized bed processor
201520 citationsauthor #3
Influence of Starting Material Particle Size on Pellet Surface Roughness
201419 citationsauthor #3
Functionality of Disintegrants and Their Mixtures in Enabling Fast Disintegration of Tablets by a Quality by Design Approach
20140 citationsauthor #3
Distribution of a viscous binder during high shear granulation--sensitivity to the method of delivery and its impact on product properties.
201417 citationsauthor #4
Functionality of Disintegrants and Their Mixtures in Enabling Fast Disintegration of Tablets by a Quality by Design Approach
201482 citationsauthor #3
Moistening Liquid-Dependent De-aggregation of Microcrystalline Cellulose and Its Impact on Pellet Formation by Extrusion–Spheronization
201420 citationsauthor #2
Influence of disintegrants in different substrate physical form on dimensional recovery of multi-component tablet.
201411 citationsauthor #3
Insights into the functionality of pelletization aid in pelletization by extrusion-spheronization
201315 citationsauthor #3
Microencapsulation of microbial cells
2013230 citationsauthor #3
A prediction model for monitoring ribbed roller compacted ribbons.
201311 citationsauthor #3
Assessment of disintegration of rapidly disintegrating tablets by a visiometric liquid jet-mediated disintegration apparatus.
201314 citationsauthor #2
Influence of Starting Material Particle Size on Pellet Surface Roughness
20130 citationsauthor #3
Importance of Wet Packability of Component Particles in Pellet Formation
20130 citationsauthor #3
Importance of Wet Packability of Component Particles in Pellet Formation
201315 citationsauthor #3
Understanding disintegrant action by visualization.
201270 citationsauthor #2
Spray granulation for drug formulation
201134 citationsauthor #4
Evaluation of the Physicochemical Properties and Compaction Behavior of Melt Granules Produced in Microwave-Induced and Conventional Melt Granulation in a Single Pot High Shear Processor
20116 citationsauthor #5
Calibration sampling paradox in near infrared spectroscopy: a case study of multi-component powder blend.
201030 citationsauthor #2
In-line quantification of drug and excipients in cohesive powder blends by near infrared spectroscopy.
201075 citationsauthor #1
Online monitoring of particle mass flow rate in bottom spray fluid bed coating--development and application.
20109 citationsauthor #3
Dielectric properties of pharmaceutical materials relevant to microwave processing: effects of field frequency, material density, and moisture content.
201033 citationsauthor #3
In-line quantification of micronized drug and excipients in tablets by near infrared (NIR) spectroscopy: Real time monitoring of tabletting process.
201081 citationsauthor #3
Development of a visiometric process analyzer for real-time monitoring of bottom spray fluid-bed coating.
201023 citationsauthor #1
Classification of Annular Bed Flow Patterns and Investigation on Their Influence on the Bottom Spray Fluid Bed Coating Process
201020 citationsauthor #3
Layered growth with bottom-spray granulation for spray deposition of drug.
200925 citationsauthor #2
Air-dictated bottom spray process: impact of fluid dynamics on granule growth and morphology
20095 citationsauthor #1
Modifying matrix micro-environmental pH to achieve sustained drug release from highly laminating alginate matrices.
200850 citationsauthor #2
Surfactants and Colors in Tablets
20082 citationsauthor #2
Chick chorioallantoic membrane as an in situ biological membrane for pharmaceutical formulation development: a review.
200812 citationsauthor #3
Microwave-assisted drying of pharmaceutical granules and its impact on drug stability.
200830 citationsauthor #2
Drying efficiency and particle movement in coating--impact on particle agglomeration and yield.
200828 citationsauthor #3
Chick Chorioallantoic Membrane as an In Situ Biological Membrane for Pharmaceutical Formulation Development: A Review
200818 citationsauthor #3
A Study on Microwave-Induced Melt Granulation in a Single Pot High Shear Processor
20082 citationsauthor #1
Importance of Small Pores in Microcrystalline Cellulose for Controlling Water Distribution during Extrusion–Spheronization
200819 citationsauthor #3
Impact of cross-linker on alginate matrix integrity and drug release.
200834 citationsauthor #2
Mechanistic Study on Hydration and Drug Release Behavior of Sodium Alginate Compacts
200736 citationsauthor #3
Elucidation of spheroid formation with and without the extrusion step
200736 citationsauthor #1
Scanning Probe Microscopy for Surface Roughness Characterization of Lactose Carriers Used in Dry Powder Inhalation Therapy
20071 citationsauthor #5
Study of coat quality of tablets coated by an on-line supercell coater
200712 citationsauthor #2
New Indices to Characterize Powder Flow Based on Their Avalanching Behavior
200636 citationsauthor #2
Torque rheological parameters to predict pellet quality in extrusion-spheronization.
200630 citationsauthor #2
Evaluation of sodium alginate as drug release modifier in matrix tablets.
2006245 citationsauthor #1
Feasibility of Eliminating Premixing for the Production of Pellets in a Rotary Processor
20061 citationsauthor #2
Functionality of Cross-Linked Polyvinylpyrrolidone as a Spheronization Aid: A Promising Alternative to Microcrystalline Cellulose
200550 citationsauthor #1
Application of multidimensional scaling to preformulation sciences: a discriminatory tool to group microcrystalline celluloses.
20051 citationsauthor #1
A Novel Preformulation Tool to Group Microcrystalline Celluloses Using Artificial Neural Network and Data Clustering
200410 citationsauthor #3
Roller Compaction of Crude Plant Material: Influence of Process Variables, Polyvinylpyrrolidone, and Co‐milling
200410 citationsauthor #3
Wet Spheronization by Rotary Processing—A Multistage Single‐Pot Process for Producing Spheroids
200436 citationsauthor #2
Pre-formulation studies on moisture absorption in microcrystalline cellulose using differential thermo-gravimetric analysis.
200412 citationsauthor #2
The influence of operational variables on mean size and size distribution of spheroids produced by rotary spheronization using teardrop studs.
200212 citationsauthor #1
Influence of teardrop studs on rotating frictional base plate on spheroid quality in rotary spheronization.
200217 citationsauthor #2
Effect of tabletting compaction pressure on alginate microspheres.
20006 citationsauthor #3
Role of Base Plate Rotational Speed in Controlling Spheroid Size Distribution and Minimizing Oversize Particle Formation During Spheroid Production by Rotary Processing
200020 citationsauthor #1
Influence of polytetrafluoroethylene on spheroid production by rotary processing
19987 citationsauthor #1
The influence of liquid spray rate and atomizing pressure on the size of spray droplets and spheroids
199549 citationsauthor #3
The Role of Moisture and Gap Air Pressure in the Formation of Spherical Granules by Rotary Processing
199428 citationsauthor #3
Spheronization conditions on spheroid shape and size
199391 citationsauthor #3

TIMELINE

1993 91 citations

1994 28 citations

1995 49 citations

1998 7 citations

2000 26 citations

2002 29 citations

2004 68 citations

2005 51 citations

2006 312 citations

2007 85 citations

2008 195 citations

2009 30 citations

2010 271 citations

2011 40 citations

2012 70 citations

2013 285 citations

2014 149 citations

2015 102 citations

2016 372 citations

2017 79 citations

2018 181 citations

2019 45 citations

2020 23 citations

2022 59 citations

2023 10 citations

2024 24 citations

COAUTHOR MAP

CONCEPT FOOTPRINT