SCIENCE@home

A 3D model predicts behavior of a soft bodied worm robot performing peristaltic locomotion

S. Riddle,Clayton Jackson,K. Daltorio,R. D. Quinn

Published 2025 in Bioinspiration & Biomimetics

ABSTRACT

The passive compliance of a soft worm-like body can be a key advantage for traversal of complex confined spaces, but in practice, the body’s stiffness and contact friction often require experimental adjustments. Here, for the first time, we develop a dynamic, 3D simulation that enables systematic testing of robot parameters (e.g. stiffness and friction) in different radius of curvature environments, which will help us better understand design trade-offs in creating soft robots that mimic worm-like locomotion. Specifically, we use the open-source physics engine MuJoCo because it is established for both biomechanical and robotic modeling, as well as multi-point contact dynamics, which are present in confined spaces. The model has sensory capabilities analogous to the stretch and tactile proprioception of an earthworm and is amenable to both feedforward and feedback control. After validating our model by comparing to our previous physical robot, we quantify locomotion performance over a range of friction coefficients, structural stiffnesses, and turning radii. We found that speed increased with friction coefficient on flat ground for higher stiffness models, but decreased with friction coefficient for lower stiffness models, both on flat ground and in pipe bends. For turning radii greater than 0.45 m, speed and stiffness also had a positive correlation, however, below the critical turning radius of 0.45 m, increasing stiffness had no appreciable influence on speed. This simulation can potentially be used to optimize designs for particular environments, to better understand the influence of passive vs. active control on individual and coupled segments, and perhaps offer a deeper understanding of how animals and robots can employ soft structures. For example, we can posit from our results that changing stiffness will not increase speed below the critical turning radius, meaning further experiments should focus on other parameters or actively controlled turning to improve speed through tighter turns.

PUBLICATION RECORD

CITATION MAP

EXTRACTION MAP

CLAIMS

  • No claims are published for this paper.

CONCEPTS

  • No concepts are published for this paper.

REFERENCES

Showing 1-54 of 54 references · Page 1 of 1

CITED BY