Addition of Al and Fe salts during treatment of paper mill effluents to improve activated sludge settlement characteristics.

No abstract is available for this paper.

• Publication year

  2007

• Venue

  Bioresource Technology

• Publication date

  2007-11-01

• Fields of study

  Medicine, Chemistry, Environmental Science

• Identifiers
  DOI 10.1016/J.BIORTECH.2006.10.004PMID 17113285
• External record

  Open on Semantic Scholar

• Source metadata

  Semantic Scholar, PubMed

• No claims are published for this paper.

• No concepts are published for this paper.

• Activated sludge characteristics in relation to stable foam formation

  2007cited by this paper
• Relations between extraction protocols for activated sludge extracellular polymeric substances (EPS) and EPS complexation properties: Part I. Comparison of the efficiency of eight EPS extraction methods

  2006cited by this paper
• Filamentous bulking sludge--a critical review.

  2004cited by this paper
• Investigation of extracellular polymer substances (EPS) and physicochemical properties of different activated sludge flocs under steady-state conditions

  2003cited by this paper
• Bulking in activated sludge plants treating paper mill wastewaters.

  2003cited by this paper
• A comprehensive insight into floc characteristics and their impact on compressibility and settleability of activated sludge

  2003cited by this paper
• The influence of key chemical constituents in activated sludge on surface and flocculating properties.

  2003cited by this paper
• Impact of iron salts on activated sludge and interaction with nitrite or nitrate.

  2003cited by this paper
• Coagulation by hydrolysing metal salts

  2003cited by this paper
• A unified theory for extracellular polymeric substances, soluble microbial products, and active and inert biomass.

  2002cited by this paper
• Examination of three theories for mechanisms of cation-induced bioflocculation.

  2002cited by this paper
• The Effects of Temperature and PH on Settlability of Activated Sludge Flocs

  2001cited by this paper
• Surface properties of sludge and their role in bioflocculation and settleability.

  2001cited by this paper
• The treatment of pulp and paper mill effluent: a review.

  2001cited by this paper
• Survey of filamentous populations in nutrient removal plants in four European countries

  1998cited by this paper
• Effects of bacterial cell surface structures and hydrophobicity on attachment to activated sludge flocs

  1997cited by this paper
• Effects of Colloidal Stability on Clarification and Dewatering of Activated Sludge

  1996cited by this paper
• Aspects of the Behaviour of Filamentous Microbes in Activated Sludge

  1996cited by this paper
• Extraction of extracellular polymers from activated sludge using a cation exchange resin

  1996cited by this paper
• Extracellular polymers in activated sludge and stable foams

  1995cited by this paper
• Activated Sludge: Bulking and Foaming Control

  1994cited by this paper
• Bioflocculation in activated sludge: an analytic approach

  1993cited by this paper
• Physicochemical aspects of activated sludge in relation to stable foam formation

  1992cited by this paper
• Manual on the causes and control of activated sludge bulking and foaming

  1992cited by this paper
• Effects of temperature, pH and D. O. concentration on settleability of activated sludge

  1990cited by this paper
• Activated Sludge: Theory and Practice

  1990cited by this paper
• Microbial Enhanced Oil Recovery

  1989cited by this paper
• Standard methods for the examination of water and wastewater : supplement to the sixteenth edition

  1988cited by this paper
• A further examination into the composition of activated sludge surfaces in relation to their settlement characteristics

  1985cited by this paper
• Microscopic sludge investigation manual

  1983cited by this paper
• Biopolymer yields from activated sludge and their relation to the operation of treatment plant

  1982cited by this paper

• Recovery of disintegrated halophilic aerobic granular sludge through ferric ion addition: Dual roles in filamentous fungal inhibition and microbial adhesion enhancement.

  2025cites this paper
• Utilization of diatomite and polymeric ferric sulfate in sludge bulking control: mechanism analysis and economic evaluation

  2025cites this paper
• Unveiling the Secrets of Particle Size in Aerobic Granules: Impacts on Emerging Contaminants Removal, Stability, and Sustainability: A Review

  2025cites this paper
• Aerobic granular sludge treating tannery wastewater and particle size control

  2025cites this paper
• Understanding Climate Change Impacts on Streamflow by Using Machine Learning: Case Study of Godavari Basin

  2025cites this paper
• Advancing sludge bulking control in wastewater treatment: A comprehensive review of detection, identification, and strategic interventions

  2025cites this paper
• A critical study on the treatability of metal plating industry wastewater and real scale adaptation

  2024cites this paper
• Rapid static feeding combined with Fe2+ addition for improving the formation and stability of aerobic granular sludge in low-strength wastewater.

  2023cites this paper
• A Comprehensive Review on Pulp and Paper Industries Wastewater Treatment Advances

  2023cites this paper
• Insights into the potential application of magnetic field in controlling sludge bulking and foaming: A review.

  2022cites this paper
• Alleviating the adverse impacts of high influent ammonium on an activated sludge system by adding Fe salts and ballasted media

  2022cites this paper
• Comparison of ultrasound and UV technologies to control bulking and foaming in a wastewater treatment facility. A case study in an industrial park in Morelos, Mexico

  2022cites this paper
• Strategies for Controlling Filamentous Bulking in Activated Sludge Wastewater Treatment Plants: The Old and the New

  2022cites this paper
• Nitrogen removal performance and microbial characteristics during simultaneous chemical phosphorus removal process using Fe3.

  2022cites this paper
• Elemental distribution of latex‐based aerobic granules and its effects on micromorphological properties and settling performance

  2022cites this paper
• Membrane fouling performance of Fe-based coagulation-ultrafiltration process: Effect of sedimentation time.

  2021cites this paper
• Cultivation of aerobic granular sludge by modification of seeding condition

  2021cites this paper
• Continuous flow reactors for cultivating aerobic granular sludge: configuration innovation, principle and research prospect

  2021cites this paper
• Enhanced ultrafiltration membrane fouling alleviation by module rotation with Fe-based flocs

  2021cites this paper
• Controlling filamentous sludge bulking by regulating oxygen supply in the start of BISURE system

  2021cites this paper
• Copper and Lead Ions Removal by Electrocoagulation: Process Performance and Implications for Energy Consumption

  2021cites this paper
• Efficiency and mechanism of nitrogen removal from piggery wastewater in an improved microaerobic process.

  2021cites this paper
• Initialization, enhancement and mechanisms of aerobic granulation in wastewater treatment

  2021cites this paper
• Simultaneous evaluation of bioactivity and settleability of activated sludge using fractal dimension as an intermediate variable.

  2020cites this paper
• Full-scale investigation of ferrous dosing in sewers and a wastewater treatment plant for multiple benefits.

  2020cites this paper
• Characteristics and performance of aerobic granulation seeded with anaerobic bioflocs for treatment of domestic wastewater

  2020cites this paper
• A novel strategy to alleviate ultrafiltration membrane fouling by rotating membrane module.

  2020cites this paper
• Enhanced alleviation of ultrafiltration membrane fouling by regulating cake layer thickness with pre-coagulation during drinking water treatment

  2020cites this paper
• Modelling the effects of ferric salt dosing for chemical phosphorus removal on the settleability of activated sludge

  2019influential citation
• Using high frequency and low-intensity ultrasound to enhance activated sludge characteristics.

  2019cites this paper
• Potential of a Static Magnetic Field to Inhibit Filamentous Sludge Bulking in Activated Sludge Process

  2019cites this paper
• Rapid control of activated sludge bulking and simultaneous acceleration of aerobic granulation by adding intact aerobic granular sludge.

  2019cites this paper
• Emerging investigator series: treatment and recycling of heavy metals from nanosludge

  2019cites this paper
• Inducing in situ crystallization of vivianite in a UCT-MBR system for enhanced removal and possible recovery of phosphorus from sewage.

  2019cites this paper
• The possibility of using Portland cement to improve the sedimentation properties of activated sludge

  2019cites this paper
• Effect of electrocoagulation on MBR under different power supply conditions

  2019cites this paper
• Removal of Zinc Ions from Model Wastewater by Electrocoagulation

  2019cites this paper
• Effects of Al3+ on pollutant removal and extracellular polymeric substances (EPS) under anaerobic, anoxic and oxic conditions

  2019cites this paper
• Integrated Fe-based floc-membrane process for alleviating ultrafiltration membrane fouling by humic acid and reservoir water

  2018cites this paper
• Using image processing for determination of settled sludge volume.

  2018cites this paper
• The Impact of Aluminium Salt Dosing for Chemical Phosphorus Removal on the Settleability of Activated Sludge

  2018cites this paper
• Understanding and optimization of the flocculation process in biological wastewater treatment processes: A review.

  2018cites this paper
• Impact of fly ash pretreatment on aerobic treatment of thermomechanical pulping spent liquor

  2018cites this paper
• Influence of ferrous iron dosing strategy on aerobic granulation of activated sludge and bioavailability of phosphorus accumulated in granules

  2018cites this paper
• Slow and fast diffusion in a lead sulphate gravity separation process

  2017cites this paper
• Improvement in Settling Performance of Disrupted Sludge by Salt Addition

  2017cites this paper
• Synthesis of hydrophobically modified cellulose-based flocculant and its application in treatments of kaolin suspension and machining wastewater

  2017cites this paper
• Pretreatment and in-situ fly ash systems for improving the performance of sequencing batch reactor (SBR) in treating thermomechanical pulping effluent

  2017cites this paper
• Cationic nanocelluloses in dewatering of municipal activated sludge

  2017cites this paper
• External Treatment Technologies Used for Pulp and Paper Mill Effluents

  2017cites this paper
• Improving sludge settleability by introducing an innovative, two-stage settling sequencing batch reactor

  2017cites this paper
• The Impact of Alum on the Bulking of a Full Scale Activated Sludge Plant

  2017influential citation
• Application of magnetic field for reduction of sludge bulking in activated sludge system

  2016cites this paper
• Effect of cations on simultaneous enhancement of dewaterability and settleability of activated sludge under mild thermal treatment

  2016cites this paper
• Detailed comparison of bacterial communities during seasonal sludge bulking in a municipal wastewater treatment plant.

  2016cites this paper
• Influence of high temperature on the performance of aerobic granular sludge in biological treatment of wastewater.

  2016cites this paper
• The Impact of Alum on the Bulking of a Full Scale Activated Sludge Plant

  2016influential citation
• The use of keramsite grains as a support material for the biofilm in moving bed technology

  2015cites this paper
• Synergy effect of ultrasonication and salt addition on settling behaviors of activated sludge

  2015cites this paper
• Heavy metal ions removal from metal plating wastewater using electrocoagulation: Kinetic study and process performance

  2015cites this paper
• The possibilities of limitation and elimination of activated sludge bulking

  2015cites this paper
• Aerobic sludge granulation in a Reverse Flow Baffled Reactor (RFBR) operated in continuous-flow mode for wastewater treatment

  2015cites this paper
• Review on recent developments on pulp and paper mill wastewater treatment.

  2015influential citation
• Bioindication assessment of activated sludge Adaptation in a Lab-Scale Experiment

  2015cites this paper
• Traitement du foisonnement filamenteux induit par Microthrix parvicella par ajout de sels métalliques : impact sur les boues activées

  2015cites this paper
• The effect of loess addition on the settling ability of activated sludge

  2015cites this paper
• Lakes and reservoirs restoration – Short description of the chosen methods

  2015cites this paper
• Aerobic granulation in a modified oxidation ditch with an adjustable volume intraclarifier.

  2014cites this paper
• Aerobic Sludge Granulation in a Full-Scale Sequencing Batch Reactor

  2014cites this paper
• Filamentous sludge bulking control by nano zero-valent iron in activated sludge treatment systems.

  2014cites this paper
• Process improvements in biological nutrient removal systems for better wastewater treatment performance

  2014cites this paper
• The effect of clay addition on the settling ability of activated sludge as a proposed method to control filamentous bulking

  2014cites this paper
• The influence of multivalent cations on the flocculation of activated sludge with different sludge retention times.

  2014cites this paper
• Enhancement of COD-Nutrients Removals and Filterability of Secondary Clarifier Municipal Wastewater Influent Using Electrocoagulation Technique

  2013cites this paper
• Flocculating characteristic of activated sludge flocs: interaction between Al(3+)) and extracellular polymeric substances.

  2013cites this paper
• Livestock wastewater treatment using aerobic granular sludge.

  2013cites this paper
• Nutrient removal performance and microbial community structure in an EBPR system under the limited filamentous bulking state.

  2013cites this paper
• Control filamentous bulking caused by chlorine-resistant Type 021N bacteria through adding a biocide CTAB.

  2012cites this paper
• Impacts of alum addition on the treatment efficiency of cloth-media MBR

  2012cites this paper
• Control of sludge settleability and nitrogen removal under low dissolved oxygen condition

  2012cites this paper
• Use of molecular techniques for the analysis of foam-causing bacteria in Al Bireh oxidation ditch, Palestine

  2012cites this paper
• Effect of operating conditions on the chemical phosphorus removal using ferric chloride by evaluating orthophosphate precipitation and sedimentation of formed precipitates in batch and continuous systems

  2012cites this paper
• Simultaneous precipitation of phosphorus in a kraft pulp mill wastewater treatment plant.

  2012cites this paper
• Stable limited filamentous bulking through keeping the competition between floc-formers and filaments in balance.

  2012cites this paper
• Early warning signs of bulking in an activated sludge system through interpretation of ATP data in a systems analysis context

  2011cites this paper
• Notice of RetractionInfluence of Iron Content on Activated Sludge Performance in Membrane Bioreactor

  2010cites this paper
• Mode of action of ferric and ferrous iron salts in activated sludge

  2010cites this paper
• Energy saving achieved by limited filamentous bulking sludge under low dissolved oxygen.

  2010cites this paper
• Assessment of activated sludge stability in lab-scale experiments.

  2009cites this paper
• de Lamas Activadas

  2009cites this paper
• Nocardia foaming control in activated sludge process treating domestic wastewater.

  2008cites this paper
• Identificación de bacterias filamentosas en EDAR industriales

  2008cites this paper
• Activated Sludge and Other Aerobic Suspended Culture Processes

  2008cites this paper
• Relationship between floc composition and flocculation and settling properties studied at a full scale activated sludge plant.

  2008cites this paper