Effect of Na2O and B2O3 on Heat Transfer Behavior of Low Fluorine Mold Flux for Casting Medium Carbon Steels

An investigation was conducted to study the effects of Na2O and B2O3 on heat transfer behavior of low fluorine mold flux for casting medium carbon steels by using Single Hot Thermocouple Technique (SHTT) and an advanced Infrared Emitter Technique (IET) in this paper. Results suggested that crystalline layer thickness, crystalline fraction and interfacial thermal resistance of the mold flux increased with the addition of Na2O, while they decreased with the increase of B2O3. Besides, the initial crystallization temperature and steady state heat flux reduced with the addition of Na2O, and they were getting higher with the addition of B2O3. Those results obtained in this research can provide fundamental guidance for designing new type of low fluorine or fluorine free mold fluxes for casting medium carbon steels.

• Publication year

  2013

• Venue

  Isij International

• Publication date

  2013-04-15

• Fields of study

  Materials Science, Engineering

• Identifiers
  DOI 10.2355/ISIJINTERNATIONAL.53.665
• External record

  Open on Semantic Scholar

• Source metadata

  Semantic Scholar

• No claims are published for this paper.

• No concepts are published for this paper.

• Handbook of physico-chemical properties at high temperatures

  1988cited by this paper

• Investigation of Mold Flux Entrapment in Deep Oscillation Mark of Interstitial-Free Steel Shell Using Mold Simulator

  2024cites this paper
• Thermal conductivity of CaO-B2O3 system as functions of temperature including glass transition

  2023cites this paper
• Effect of Al2O3/Na2O ratio and MnO on high-temperature properties of mold flux for casting peritectic steel

  2022cites this paper
• Crystallization characteristics of CaO–Al2O3–SiO2–Li2O–B2O3 mold flux with different values of w(CaO)/w(Al2O3)

  2021cites this paper
• Effect of B2O3 on the Melting Temperature and Viscosity of CaO–SiO2–MgO–Al2O3–TiO2–Cr2O3 Slag

  2021cites this paper
• MOLECULAR DYNAMIC SIMULATION OF THE MELT OF OXIDE-FLUORIDE INDUSTRIAL SLAG-FORMING MIXTURE

  2019cites this paper
• Effect of CaO/Al2O3 ratio on viscosity and structure of CaO–Al2O3-based fluoride-free mould fluxes

  2019cites this paper
• Molecular–Dynamic Simulation of the Melt of an Industrial Oxide–Fluoride Mold Flux

  2019cites this paper
• High-Temperature Properties of Mold Flux Observed and Measured In Situ by Single/Double Hot-Thermocouple Technique

  2018cites this paper
• Initial Solidification and Its Related Heat Transfer Phenomena in the Continuous Casting Mold

  2017cites this paper
• Effect of B2O3 on Crystallization Behavior, Structure, and Heat Transfer of CaO-SiO2-B2O3-Na2O-TiO2-Al2O3-MgO-Li2O Mold Fluxes

  2017cites this paper
• Effects of CaO/SiO2 Ratio and Na2O Content on Melting Properties and Viscosity of SiO2-CaO-Al2O3-B2O3-Na2O Mold Fluxes

  2017cites this paper
• An Investigation of the Mold-Flux Performance for the Casting of Cr12MoV Steel Using a Mold Simulator Technique

  2017cites this paper
• Crystallization Behavior and Heat Transfer of Fluorine-Free Mold Fluxes with Different Na2O Concentration

  2016cites this paper
• Mass Transfer Behavior of Phosphorus from the Liquid Slag Phase to Solid 2CaO·SiO2 in the Multiphase Dephosphorization Slag

  2016cites this paper
• A Review of Mold Flux Development for the Casting of High-Al Steels

  2016cites this paper
• Advanced Mold Flux Development for the Casting of High-Al Steels

  2016cites this paper
• The Development of CaO-SiO2-B2O3-based Fluorine-Free Mold Flux for a Continuous Casting Process

  2016cites this paper
• Crystallization Kinetics Study of the (2CaO · SiO2‐3CaO · P2O5) Solid Solution in the Multiphase Dephosphorization Flux

  2016cites this paper
• Melting Properties and Viscosity of SiO2‐CaO‐Al2O3‐B2O3 System

  2015cites this paper
• Effect of Al2O3 on the Crystallization of Mold Flux for Casting High Al Steel

  2015cites this paper
• Isothermal Crystallization Study of (2CaO · SiO2–3CaO · P2O5) Solid Solution in the 45 mass% CaO‐30 mass% SiO2‐20 mass% FeOt‐5 mass% P2O5 System at 1623 K

  2015cites this paper
• Energy Saving Through the Control of Initial Solidification During Continuous Casting

  2014cites this paper
• Low fluorine casting powder containing boron for medium carbon steel and preparation process

  2013cites this paper