Interface pressure between socket and residual limb in prosthesis with seal-in x5 and dermo liner during level ground, stairs and ramp walking

No abstract is available for this paper.

• Publication year

  2018

• Venue

  Unknown venue

• Publication date

  2018-05-16

• Fields of study

  Medicine, Engineering

• Identifiers

  No identifiers available.

• External record

  Open on Semantic Scholar

• Source metadata

  Semantic Scholar

• No claims are published for this paper.

• No concepts are published for this paper.

• Finite element modeling of contact interface between trans-tibial residual limb and prosthetic socket

  2020influential reference
• The effect of Dermo and Seal-In X5 prosthetic liners on pressure distributions and reported satisfaction during ramp ambulation in persons with transtibial limb loss.

  2015cited by this paper
• Comparative Study between Dermo, Pelite, and Seal-In X5 Liners: Effect on Patient's Satisfaction and Perceived Problems

  2014cited by this paper
• Interface pressure in transtibial socket during ascent and descent on stairs and its effect on patient satisfaction.

  2013cited by this paper
• Regression Estimates of Pressure on Transtibial Residual Limbs Using Load Cell Measurements of the Forces and Moments Occurring at the Base of the Socket

  2013cited by this paper
• An experimental study of the interface pressure profile during level walking of a new suspension system for lower limb amputees.

  2013influential reference
• Effect of prosthetic gel liner thickness on gait biomechanics and pressure distribution within the transtibial socket.

  2012cited by this paper
• Congenital pseudoarthrosis.

  2012influential reference
• Clinical investigation of the interface pressure in the trans-tibial socket with Dermo and Seal-In X5 liner during walking and their effect on patient satisfaction.

  2012influential reference
• Qualitative study of prosthetic suspension systems on transtibial amputees' satisfaction and perceived problems with their prosthetic devices.

  2012influential reference
• Vacuum-assisted socket suspension compared with pin suspension for lower extremity amputees: effect on fit, activity, and limb volume.

  2011influential reference
• BREATHABLE LINER FOR TRANSRADIAL PROSTHESES

  2011cited by this paper
• Engineering a trans-tibial prosthetic socket for the lower limb amputee.

  2011cited by this paper
• Patient satisfaction following lower-limb amputation: the role of gait deviation

  2011cited by this paper
• Biomechanics of pressure ulcer in body tissues interacting with external forces during locomotion.

  2010cited by this paper
• Comparison of satisfaction with current prosthetic care in veterans and servicemembers from Vietnam and OIF/OEF conflicts with major traumatic limb loss.

  2010influential reference
• THE FUTURE OF ARTIFICIAL LIMBS

  2010cited by this paper
• Removable Rigid Dressing for Below-knee Amputees

  2009cited by this paper
• Medical Management of Hyperglycemia in Type 2 Diabetes: A Consensus Algorithm for the Initiation and Adjustment of Therapy

  2009cited by this paper
• Pressure characteristics at the stump/socket interface in transtibial amputees using an adaptive prosthetic foot.

  2009influential reference
• Skin problems in individuals with lower-limb loss: literature review and proposed classification system.

  2009influential reference
• Dynamic interface pressure distributions of two transtibial prosthetic socket concepts.

  2009influential reference
• Ambulation monitoring of transtibial amputation subjects with patient activity monitor versus pedometer.

  2008influential reference
• Skin problems in amputees: a descriptive study

  2008cited by this paper
• The Prevalence of Dermatological Problems for Transtibial Amputees Using a Roll-on Liner

  2008influential reference
• Below-Knee Amputation Surgery

  2007cited by this paper
• Effects of alignment on interface pressure for transtibial amputee during walking

  2007influential reference
• Vacuum Suspension and its Effects on the Limb Eng lish Ed itio

  2007cited by this paper
• Using computational simulation to aid in the prediction of socket fit: a preliminary study.

  2007cited by this paper
• Internal Mechanical Conditions in the Soft Tissues of the Residual Limb in Trans-Tibial Amputees

  2007cited by this paper
• From satisfaction to expectation: The patient's perspective in lower limb prosthetic care

  2007cited by this paper
• A comparison of knowledge of diabetes mellitus between patients with diabetes and healthy adults: a survey from north Malaysia.

  2007influential reference
• Skin Problems in an Amputee Clinic

  2006cited by this paper
• The quasi-static response of compliant prosthetic sockets for transtibial amputees using finite element methods.

  2006cited by this paper
• Use of the Prosthesis Evaluation Questionnaire (PEQ)

  2006cited by this paper
• Gait dynamics on an inclined walkway.

  2006cited by this paper
• The Effect of Prosthesis Alignment on the Symmetry of Gait in Subjects with Unilateral Transtibial Amputation

  2006cited by this paper
• Skin problems in lower limb amputees: A systematic review

  2006cited by this paper
• Effects of Fluid Insert Volume Changes on Socket Pressures and Shear Stresses: Case Studies from two Trans-Tibial Amputee Subjects

  2006cited by this paper
• Pressure distribution at the stump/socket interface in transtibial amputees during walking on stairs, slope and non-flat road.

  2006influential reference
• The mechanics of landing when stepping down in unilateral lower-limb amputees.

  2006influential reference
• Dermatologic conditions associated with use of a lower-extremity prosthesis.

  2005influential reference
• A questionnaire survey of the effect of different interface types on patient satisfaction and perceived problems among trans-tibial amputees

  2005cited by this paper
• Concepts of Pressure in an Ischial Containment Socket: Measurement

  2005influential reference
• Regional differences in pain threshold and tolerance of the transtibial residual limb: including the effects of age and interface material.

  2005influential reference
• A quasi-dynamic nonlinear finite element model to investigate prosthetic interface stresses during walking for trans-tibial amputees.

  2005influential reference
• Measuring long-term outcome in people with lower limb amputation: cross-validation of the Italian versions of the Prosthetic Profile of the Amputee and Prosthesis Evaluation Questionnaire.

  2005cited by this paper
• Literature review of the possible advantages of silicon liner socket use in trans-tibial prostheses

  2005influential reference
• Sand-Casting Technique for Trans-Tibial Prostheses

  2005cited by this paper
• Comparison of interface pressures with pin and suction suspension systems.

  2004influential reference
• Load transfer mechanics between trans-tibial prosthetic socket and residual limb--dynamic effects.

  2004influential reference
• Effects of liner stiffness for trans-tibial prosthesis: a finite element contact model.

  2004influential reference
• Lower‐extremity amputations in patients with diabetes: pre‐ and post‐surgical decisions related to successful rehabilitation

  2004cited by this paper
• Recurrent hyperkalaemia cured by amputation.

  2004cited by this paper
• Quantification of prosthetic outcomes: elastomeric gel liner with locking pin suspension versus polyethylene foam liner with neoprene sleeve suspension.

  2004influential reference
• Prosthetic prescription in the Netherlands: An interview with clinical experts

  2004influential reference
• Effect on gait and socket comfort in unilateral trans-tibial amputees after exchange to a polyurethane concept

  2004influential reference
• Development and measurement properties of the Orthotics and Prosthetics Users’ Survey (OPUS): A comprehensive set of clinical outcome instruments

  2003influential reference
• Effects of prosthesis alignment on pressure distribution at the stump/socket interface in transtibial amputees during unsupported stance and gait

  2003cited by this paper
• Pilot study: Datacapturing consistency of two transtibial casting concepts, using a manikin stump model: A comparison between the handson PTB and handsoff ICECAST compact® concepts

  2003cited by this paper
• Technical note: CIR sand casting system for transtibial socket

  2003influential reference
• Comparison of the effects of patellar tendon bearing and total surface bearing sockets on prosthetic fitting and rehabilitation

  2002influential reference
• Interface pressures during ambulation using suction and vacuum-assisted prosthetic sockets.

  2002cited by this paper
• Prosthetics and orthotics : lower limb and spinal

  2002cited by this paper
• Prosthetic sockets fabrication using rapid prototyping technology

  2002influential reference
• Stair ascent and descent at different inclinations.

  2002cited by this paper
• A comparison of trans-tibial amputee suction and vacuum socket conditions

  2001influential reference
• Mobility of people with lower limb amputations: scales and questionnaires: a review

  2001cited by this paper
• Use and Satisfaction with Prosthetic Devices Among Persons with Trauma-Related Amputations: A Long-Term Outcome Study

  2001cited by this paper
• Polyurethane gel liner usage in the Oxford Prosthetic Service

  2001influential reference
• Lower limb amputation.

  2001cited by this paper
• Effects of changes in cadence, prosthetic componentry, and time on interface pressures and shear stresses of three trans-tibial amputees.

  2000cited by this paper
• Skin disorders in amputees.

  2000influential reference
• Clinical study: Changes in interface pressure and stump shape over time: Preliminary results from a transtibial amputee subject

  2000cited by this paper
• Comparison of computational analysis with clinical measurement of stresses on below-knee residual limb in a prosthetic socket.

  2000cited by this paper
• Developments in the transtibial prosthetic socket fitting process: A review of past and present research

  2000cited by this paper
• Chronic phantom sensations, phantom pain, residual limb pain, and other regional pain after lower limb amputation.

  2000cited by this paper
• Suspension systems for prostheses.

  1999cited by this paper
• Socket/stump interface dynamic pressure distributions recorded during the prosthetic stance phase of gait of a trans-tibial amputee wearing a hydrocast socket

  1999cited by this paper
• Historical Evolution of Limb Amputation

  1999influential reference
• Conventional patellar-tendon-bearing (PTB) socket/stump interface dynamic pressure distributions recorded during the prosthetic stance phase of gait of a transtibial amputee

  1998cited by this paper
• Clinical investigation of the pressure and shear stress on the trans-tibial stump with a prosthesis.

  1998influential reference
• Prosthesis evaluation questionnaire for persons with lower limb amputations: assessing prosthesis-related quality of life.

  1998influential reference
• Scientific Characterization of the Rincoe Socket and Tekscan F-Socket Interface Pressure Measurement Systems: Implications for Clinical Utility

  1998influential reference
• Effects of alignment changes on stance phase pressures and shear stresses on transtibial amputees: measurements from 13 transducer sites.

  1998influential reference
• Calibration problems encountered while monitoring stump/socket interface pressures with force sensing resistors: Techniques adopted to minimise inaccuracies

  1997influential reference
• The Incidence of Dermatological Problems in the Silicone Suspension Sleeve User

  1997cited by this paper
• ICEROSS — a consensus view: A questionnaire survey of the use of ICEROSS in the United Kingdom

  1997influential reference
• Facing the Future of Orthotics and Prosthetics Proactively: Theory and Practice of Outcomes Measures as a Method for Determining Quality of Services

  1997cited by this paper
• Outcome of fitting an ICEROSS prosthesis: Views of trans-tibial amputees

  1996influential reference
• A quantitative method for comparing and evaluating manual prosthetic socket modifications.

  1996influential reference
• A finite element analysis of the load transfer between an above-knee residual limb and its prosthetic socket--roles of interface friction and distal-end boundary conditions.

  1996cited by this paper
• Silicone Suction Socket (3s) Versus Supracondylar Ptb Prosthesis with Pelite Liner: Transtibial Amputees' Preferences

  1996influential reference
• Current Controversies in the Anxiety Disorders

  1996cited by this paper
• The effect of prosthetic alignment on relative limb loading in persons with trans-tibial amputation: a preliminary report.

  1995cited by this paper
• Development of a non-linear finite element modelling of the below-knee prosthetic socket interface.

  1995cited by this paper
• Gait initiation of persons with below-knee amputation: the characterization and comparison of force profiles.

  1995cited by this paper
• Outcomes Measurement: A Primer for Orthotic and Prosthetic Care

  1995influential reference
• The Reaction of Skin and Soft Tissue to Shear Forces Applied Externally to the Skin Surface

  1994cited by this paper
• Total Surface Bearing Prosthesis for a Below-knee Amputee with the Skin Erosion

  1994cited by this paper

• Review on the Interface Pressure Measurement for Below Knee Prosthetic Socket

  2021influential citation
• Biomechanical Analysis of an Improvement of Prosthetic Liner using Polyurethane Focusing at the Anterior-Distal Part of Residual Limb: A Case Study

  2021cites this paper