SCIENCE@home

Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings

Gregory M. Harry,Gregory M. Harry,A. Gretarsson,P. Saulson,Scott E. Kittelberger,S. Penn,W. Startin,S. Rowan,M. Fejer,D. Crooks,G. Cagnoli,J. Hough,Norio Nakagawa

Published 2001 in Classical and Quantum Gravity

ABSTRACT

We report on thermal noise from the internal friction of dielectric coatings made from alternating layers of Ta2O5 and SiO2 deposited on fused silica substrates. We present calculations of the thermal noise in gravitational wave interferometers due to optical coatings, when the material properties of the coating are different from those of the substrate and the mechanical loss angle in the coating is anisotropic. The loss angle in the coatings for strains parallel to the substrate surface was determined from ringdown experiments. We measured the mechanical quality factor of three fused silica samples with coatings deposited on them. The loss angle, ϕ||(f), of the coating material for strains parallel to the coated surface was found to be 4.2 ± 0.3 × 10−4 for coatings deposited on commercially polished slides, and 1.0 ± 0.3 × 10−4 for a coating deposited on a superpolished disc. Using these numbers, we estimate the effect of coatings on thermal noise in the initial LIGO and Advanced LIGO interferometers. We also find that the corresponding prediction for thermal noise in the 40 m LIGO prototype at Caltech is consistent with the noise data. These results are complemented by results for a different type of coating, presented in a companion paper.

PUBLICATION RECORD

CITATION MAP

EXTRACTION MAP

CLAIMS

  • No claims are published for this paper.

CONCEPTS

  • No concepts are published for this paper.

REFERENCES

Showing 1-27 of 27 references · Page 1 of 1

CITED BY

Showing 1-100 of 331 citing papers · Page 1 of 4

1234
Next