Potential of modeling and simulations of bioengineered devices: Endoprostheses, prostheses and orthoses

No abstract is available for this paper.

• Publication year

  2016

• Venue

  Proceedings of the Institution of mechanical engineers. Part H, journal of engineering in medicine

• Publication date

  2016-04-18

• Fields of study

  Medicine, Engineering

• Identifiers
  DOI 10.1177/0954411916643343PMID 27095509
• External record

  Open on Semantic Scholar

• Source metadata

  Semantic Scholar, PubMed

• No claims are published for this paper.

• No concepts are published for this paper.

• Advances in Computational Fluid Dynamics

  2025cited by this paper
• Finite Element Modeling and Analysis of Prosthetic Knee Joint

  2021cited by this paper
• Finite element modeling of contact interface between trans-tibial residual limb and prosthetic socket

  2020cited by this paper
• Numerical and experimental investigation of the structural behavior of a carbon fiber reinforced ankle-foot orthosis.

  2015influential reference
• Designing, prototyping and manufacturing medical devices: an overview

  2014cited by this paper
• Current treatment of in-stent restenosis.

  2014cited by this paper
• The flexion–extension response of a novel lumbar intervertebral disc prosthesis: A finite element study

  2014influential reference
• SOFT TISSUE MODELING FOR VIRTUAL SURGERY SIMULATION

  2014cited by this paper
• Modeling mechanical signals on the surface of µCT and CAD based rapid prototype scaffold models to predict (early stage) tissue development

  2014influential reference
• Patient-Specific Design and Biomechanical Evaluation of a Novel Bipolar Femoral Hemi-Knee Prosthesis

  2014influential reference
• Structural numerical analysis of a three fingers prosthetic hand prototype

  2013influential reference
• Biomechanical three-dimensional finite element analysis of prostheses retained with/without zygoma implants in maxillectomy patients.

  2013influential reference
• [Numerical simulation of LVAD inflow cannulas with different tips].

  2013cited by this paper
• CFD analysis of the human airways under impedance-based boundary conditions: application to healthy, diseased and stented trachea

  2013cited by this paper
• Finite element analysis of circumferential crack behavior in cement–femoral prosthesis interface

  2013influential reference
• Volumetric CT-based segmentation of NSCLC using 3D-Slicer

  2013cited by this paper
• Stress analysis of glenoid component in design of reverse shoulder prosthesis using finite element method.

  2013influential reference
• Modular Knee Orthosis FEM Analysis from Kinematic Considerations

  2013influential reference
• Challenges in design and production of customized tracheal stents

  2013cited by this paper
• Finite element analysis for the evaluation of the structural behaviour, of a prosthesis for trans-tibial amputees.

  2012influential reference
• Computational model-based design of a wearable artificial pump-lung for cardiopulmonary/respiratory support.

  2012cited by this paper
• Nonlinear finite element modeling of prosthetic lower limbs

  2012cited by this paper
• Computational fluid-dynamics optimization of a human tracheal endoprosthesis

  2012influential reference
• Using Finite Element Method to Determine Pad Positions in a Boston Brace for Enhancing Corrective Effect on Scoliotic Spine: A Preliminary Analysis

  2012influential reference
• Simulation by Finite Elements of Bone Remodelling After Implantation of Femoral Stems

  2012cited by this paper
• A Simple Circular Cell Method for Multilevel Finite Element Analysis

  2012cited by this paper
• Finite element modelling of an energy–storing prosthetic foot during the stance phase of transtibial amputee gait

  2012influential reference
• Delamination analysis of composites by new orthotropic bimaterial extended finite element method

  2011cited by this paper
• Problems, complications, reoperations, and revisions in reverse total shoulder arthroplasty: a systematic review.

  2011cited by this paper
• Analysis of trans tibial prosthetic socket materials using finite element method

  2011cited by this paper
• Modelling ultrasound-induced mild hyperthermia of hyperplasia in vascular grafts

  2011cited by this paper
• Thoracic Artificial Lung Impedance Studies Using Computational Fluid Dynamics and In Vitro Models

  2011cited by this paper
• Prosthetic finger phalanges with lifelike skin compliance for low-force social touching interactions

  2011influential reference
• Design of patient specific prosthetic aortic valve and to study its computational fluid dynamics

  2011cited by this paper
• Computational Fluid Dynamics in Cardiovascular Disease

  2011cited by this paper
• Biomechanical changes accompanying unilateral and bilateral use of laterally wedged insoles with medial arch supports in patients with medial knee osteoarthritis.

  2011cited by this paper
• Comparison of the biomechanical 3D efficiency of different brace designs for the treatment of scoliosis using a finite element model

  2010influential reference
• A Comparative Finite-Element Analysis of Bone Failure and Load Transfer of Osseointegrated Prostheses Fixations

  2010cited by this paper
• Design and additive fabrication of foot and ankle-foot orhtoses

  2010cited by this paper
• Patient-specific models of human trachea to predict mechanical consequences of endoprosthesis implantation

  2010cited by this paper
• Finite element modelling and design of a concentration gradient generating bioreactor: application to biological pattern formation and toxicology.

  2010cited by this paper
• Knee implants – Review of models and biomechanics

  2009cited by this paper
• A finite element analysis of the vibrational behaviour of the intra-operatively manufactured prosthesis-femur system.

  2009cited by this paper
• Evolutionary Approaches for Automatic 3D Modeling of Skulls in Forensic Identification

  2009cited by this paper
• Functional evaluation of ankle foot orthoses by finite element simulations

  2009influential reference
• Designing and Implementing a Human Hand Prosthesis

  2009cited by this paper
• Using COMSOL Multiphysics for Biomechanical Analysis of Stent Technology in Cerebral Aneurysms

  2009influential reference
• The application of the finite element method in the biomechanics of the human upper limb and of some prosthetic components

  2009influential reference
• Non-linear numerical analysis of a double-threaded titanium alloy dental implant by FEM

  2008influential reference
• Design of the Implantable Artificial Lung using Computational Fluid Dynamics

  2008cited by this paper
• Design and fuzzy control of hand prosthesis or anthropomorphic robotic hand

  2008cited by this paper
• Modeling of Prosthetic Limb Rotation Control by Sensing Rotation of Residual Arm Bone

  2008cited by this paper
• Hypnosis as a treatment of chronic widespread pain in general practice: A randomized controlled pilot trial

  2008cited by this paper
• Parametric design of pressure-relieving foot orthosis using statistics-based finite element method.

  2008cited by this paper
• Patient-specific knee joint finite element model validation with high-accuracy kinematics from biplane dynamic Roentgen stereogrammetric analysis.

  2008cited by this paper
• Endotracheal stenting therapy in dogs with tracheal collapse.

  2008cited by this paper
• Substructuring FE-XFE approaches applied to three-dimensional crack propagation

  2008cited by this paper
• Manufacture of Passive Dynamic Ankle–Foot Orthoses Using Selective Laser Sintering

  2008cited by this paper
• Long-term study of bone remodelling after femoral stem: a comparison between dexa and finite element simulation.

  2007cited by this paper
• Magnetic Resonance Induced Heating in a Vascular Stent

  2007cited by this paper
• Verification, validation and sensitivity studies in computational biomechanics

  2007cited by this paper
• Shape Modification of the Boston Brace Using a Finite-Element Method With Topology Optimization

  2007cited by this paper
• Investigation of radiofrequency ablation process in liver tissue by finite element modeling and experiment.

  2007cited by this paper
• Mechanical Design and Theoretical Analysis of a Four Fingered Prosthetic Hand Incorporating Embedded SMA Bundle Actuators

  2007cited by this paper
• Influence of femoral head size on impingement, dislocation and stress distribution in total hip replacement.

  2007cited by this paper
• Total disc arthroplasty: consequences for sagittal balance and lumbar spine movement

  2007cited by this paper
• Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping

  2007cited by this paper
• Tracheal stenosis: a flow dynamics study.

  2007cited by this paper
• Fluid flow and particle deposition analysis in a realistic extrathoracic airway model using unstructured grids

  2007cited by this paper
• Vascular mechanics and pathology

  2007cited by this paper
• Modelling and gait evaluation of asymmetrical-keel foot prosthesis

  2006cited by this paper
• The quasi-static response of compliant prosthetic sockets for transtibial amputees using finite element methods.

  2006influential reference
• Finite element analysis of the lumbar spine with a new cage using a topology optimization method.

  2006cited by this paper
• New femoral designs: do they influence stress shielding?

  2006cited by this paper
• Disc arthroplasty design influences intervertebral kinematics and facet forces.

  2006cited by this paper
• Flow in Prosthetic Heart Valves: State-of-the-Art and Future Directions

  2005cited by this paper
• Development of an integrated CAD-FEA process for below-knee prosthetic sockets.

  2005cited by this paper
• A quasi-dynamic nonlinear finite element model to investigate prosthetic interface stresses during walking for trans-tibial amputees.

  2005cited by this paper
• Bio-CAD modeling and its applications in computer-aided tissue engineering

  2005cited by this paper
• Explicit finite element modeling of total knee replacement mechanics.

  2005influential reference
• Unicompartmental knee replacement.

  2005cited by this paper
• Modeling and fabrication of prosthetic sockets using selective laser sintering

  2004cited by this paper
• Load transfer mechanics between trans-tibial prosthetic socket and residual limb--dynamic effects.

  2004cited by this paper
• Stress intensity factor analysis of interface cracks using X‐FEM

  2003cited by this paper
• Three-Dimensional Computational Fluid Dynamics Modeling of Alterations in Coronary Wall Shear Stress Produced by Stent Implantation

  2003influential reference
• Clinical Consequences of Stress Shielding After Porous-Coated Total Hip Arthroplasty

  2003cited by this paper
• Finite Element Analysis as a Tool for Parametric Prosthetic Foot Design and Evaluation. Technique Development in the Solid Ankle Cushioned Heel (SACH) Foot

  2003cited by this paper
• Numerical simulation of flow in mechanical heart valves: grid resolution and the assumption of flow symmetry.

  2003cited by this paper
• Finite element analysis of the cervico-trochanteric stemless femoral prosthesis.

  2003influential reference
• Changes in curve pattern after brace treatment for idiopathic scoliosis

  2002cited by this paper
• An iterative method for viscoelastic modeling of prosthetic feet.

  2002cited by this paper
• Simulation of a knee joint replacement during a gait cycle using explicit finite element analysis.

  2002cited by this paper
• Comparison of computational analysis with clinical measurement of stresses on below-knee residual limb in a prosthetic socket.

  2000cited by this paper
• Optimization method for 3D bracing correction of scoliosis using a finite element model

  2000cited by this paper
• Experimental and Computational Flow Evaluation of Coronary Stents

  2000cited by this paper
• Velocity and wall shear stress patterns in the human right coronary artery.

  1999cited by this paper
• Determination of blood flow and endothelial shear stress in human coronary artery in vivo.

  1999cited by this paper
• The influence of lumbar disc height and cross-sectional area on the mechanical response of the disc to physiologic loading.

  1999cited by this paper
• Finite element modelling of a residual lower-limb in a prosthetic socket: a survey of the development in the first decade.

  1998cited by this paper
• New concepts -- biomechanical studies of a newly designed femoral prosthesis (cervico-trochanter prosthesis).

  1997cited by this paper

• Modelling and FE simulation of 3D printed Co-Cr Lattice Structures for biomedical applications

  2022cites this paper
• Effectiveness of bilateral single-hinged knee bracing in osteoarthritis: A finite element study

  2021cites this paper
• Animal orthosis fabrication with additive manufacturing – a case study of custom orthosis for chicken

  2021cites this paper
• Surface finish of Additively Manufactured Metals: biofilm formation and cellular attachment

  2021cites this paper
• Mechanical characterization and properties of laser-based powder bed–fused lattice structures: a review

  2021cites this paper
• Selective Laser Melting and Electron Beam Melting of Ti6Al4V for Orthopedic Applications: A Comparative Study on the Applied Building Direction

  2020cites this paper
• Post Processing of 3D Printed Metal Scaffolds: a Preliminary Study of Antimicrobial Efficiency

  2020cites this paper
• Bioprinting process optimization: evaluation of parameters influence on the extrusion of inorganic polymers

  2020cites this paper
• Carbonization of polymer precursors substrates to direct human iPSC-derived neurons differentiation and maturation

  2020cites this paper
• University of Birmingham Post processing of 3D printed metal scaffolds

  2020cites this paper
• A new methodology to analyze the functional and physical architecture of existing products for an assembly oriented product family identification

  2020cites this paper
• Characterization of chemical surface finishing with cold acetone vapours on ABS parts fabricated by FDM

  2019cites this paper
• Equipment for additive manufacturing of biocompatible silicone

  2019cites this paper
• Characterization of chemical surface finishing with cold acetone vapours on ABS parts fabricated by FDM

  2019cites this paper
• Biomaterials Characterization for Orthopedic Orthoses: a Systematic Review

  2019cites this paper
• 3D printing for health & wealth: Fabrication of custom-made medical devices through additive manufacturing

  2018cites this paper
• Finite element analysis of the amputated lower limb: A systematic review and recommendations.

  2017cites this paper
• Development and Validation of a Numerical Model for the Optimization of a Brace for Lower Limb

  2017cites this paper