The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement.

No abstract is available for this paper.

• Publication year

  1986

• Venue

  Journal of Bone and Joint Surgery. American volume

• Publication date

  1986-09-01

• Fields of study

  Medicine, Materials Science, Engineering

• Identifiers
  DOI 10.2106/00004623-198668070-00010PMID 3745241
• External record

  Open on Semantic Scholar

• Source metadata

  Semantic Scholar, PubMed

• No claims are published for this paper.

• No concepts are published for this paper.

• Side-effects of prosthetic materials on the human body

  2004cited by this paper
• The effect of conformity and plastic thickness on contact stresses in metal-backed plastic implants.

  1985cited by this paper
• A comparison of RCH 1000 and Hi-Fax 1900 ultra-high molecular weight polyethylenes.

  1985cited by this paper
• Retrieval Analysis of Total Joint Replacement Components: A Six-Year Experience

  1985cited by this paper
• A study of implant failure in the Wagner resurfacing arthroplasty.

  1985cited by this paper
• Fatigue crack propagation behavior of ultrahigh molecular weight polyethylene

  1984cited by this paper
• Retrieval analysis of total knee prostheses: a method and its application to 48 total condylar prostheses.

  1983cited by this paper
• The effect of metal backing on stresses in polyethylene acetabular components.

  1983cited by this paper
• The pathology of failed total joint arthroplasty.

  1982cited by this paper
• The effect of carbon fiber reinforcement on contact area, contact pressure, and time-dependent deformation in polyethylene tibial components.

  1981cited by this paper
• CONTACT AREA AND PRESSURE DISTRIBUTION IN CONTEMPORARY TOTAL KNEE DESIGNS.

  1981cited by this paper
• The Monk "soft top" endoprosthesis. Clinical, biomechanical and histopathological observations.

  1980cited by this paper
• Evaluation of the tissue response to the wear products of the hip joint endo-arthroprosthesis.

  1979cited by this paper
• Rheumatische Erkrankungen. Ein Leitfaden für Studierende und Ärzte

  1979cited by this paper
• Wear of high-density polyethylene on bone and cartilage.

  1979cited by this paper
• A biomechanical investigation of the human hip.

  1978cited by this paper

• Current concepts of medial unicompartmental knee replacement: part 2—hot topics and further directions

  2026cites this paper
• High Demand Loading Conditions and Their Effect on Polyethylene Stresses in Lumbar Total Joint Replacement: Implications for Spine Wear Protocols

  2026cites this paper
• Implant Retrieval Analysis for Total Joint Arthroplasty: A Review

  2026cites this paper
• Polyethylene Stresses in Lumbar Total Joint Replacement Under Elevated Loading: Insights from an Anatomic Finite Element Model

  2026cites this paper
• Sensitivity of Lumbar Total Joint Replacement Contact Stresses Under Misalignment Conditions—Finite Element Analysis of a Spine Wear Simulator

  2025cites this paper
• Computational modeling and simulation for medical devices: a summary of the 2024 FDA/MDIC Symposium

  2025cites this paper
• Survivorship and Cause-Specific Revision Risk Following Primary Total Knee Arthroplasty Using a Newer versus Older Generation Implant System From the Same Manufacturer.

  2025cites this paper
• Numerical study of tibial inserts made of conventional and vitamin E blended UHMWPE with and without cross linking in total knee replacement under EHL conditions.

  2025cites this paper
• Changes in coronal tibiofemoral subluxation before and after medial unicompartmental knee arthroplasty: an observation for ten years

  2025cites this paper
• Mobile Bearing Total Knee Arthroplasty is Associated with an Increased Risk of Mechanical Loosening: A Follow-up Analysis of the American Joint Replacement Registry.

  2025cites this paper
• Sensitivity of Lumbar Total Joint Replacement to Axial and Coronal Plane Misalignment Using Computational Modeling

  2025cites this paper
• Does Thickness of the Polyethylene Insert Impact Complications and Revisions Following Total Knee Arthroplasty?

  2025cites this paper
• Temperature and strain rate effects on ultra‐high‐molecular‐weight‐polyethylene compression: An experimental and modeling approach

  2024cites this paper
• Advances in Total Knee Arthroplasty

  2024cites this paper
• A lateral approach allows accurate and stable total elbow replacement in dogs.

  2024cites this paper
• Assessment of polyethylene wear in dual mobility implant for Asians on various head-to-liner ratios: A finite-element analysis

  2024cites this paper
• Sensitivity, robustness, and reproducibility of U-shaped delamination test for evaluation of candidate ultra-high molecular weight polyethylene materials for joint replacements

  2024cites this paper
• Will Mobile-Bearing Total Knee Arthroplasty Be Lost to History? A Comparative Study of Long-Term Follow-Up

  2024cites this paper
• Cadaveric Testing of a Novel Intraoperative Load Sensor for Soft-tissue balancing during Total Knee Replacements

  2024cites this paper
• Long-term results of a rotationally unconstrained fixed-bearing total knee prosthesis

  2024cites this paper
• Optimizing laser cladding powder injection parameters to shape bioactive glass nano-coated zirconium oxide for biomedical application

  2024cites this paper
• QUESTION: Is There Evidence Supporting the use of All-Polyethylene Tibial Components in Primary Total Knee Arthroplasty?

  2024cites this paper
• SHORT-TERM EVALUATION BETWEEN POLYETHYLENE THICKNESS IN PRIMARY TOTAL KNEE ARTHROPLASTY

  2024cites this paper
• Investigation of contact behavior on a model of the dual-mobility artificial hip joint for Asians in different inner liner thicknesses

  2024cites this paper
• Increased Revision Risk with Mobile Bearings in Total Knee Arthroplasty: An Analysis of the American Joint Replacement Registry.

  2023cites this paper
• Highly crosslinked polyethylene liner thickness does not influence survival in primary total hip arthroplasty after mean follow-up of 13 years: a study of 2,565 hips with a single design liner.

  2023cites this paper
• Thin highly cross-linked polyethylene liners combined with large femoral heads in primary total hip arthroplasty show excellent survival and low wear rates at a mean follow-up of 12.8 years.

  2023cites this paper
• Hip Resurfacing in Teenagers.

  2023cites this paper
• Polyethylene thickness does not influence aseptic revision rate with highly cross-linked liners in THA with 36-mm femoral heads

  2023cites this paper
• Metal-on-crosslinked polyethylene in total hip arthroplasty – an excellent combination at fifteen to twenty years of follow-up

  2023cites this paper
• Does measuring the medial gap before bone resection in total knee arthroplasty provide optimum gap adjustment and prevent bone recutting?

  2023cites this paper
• Striated Pattern on Worn Surface of a Retrieved TKR Tibial Insert Stems from Microstructural Changes in the UHMWPE.

  2023cites this paper
• Tibial component rotation alters soft tissue balance in a cruciate retaining total knee arthroplasty

  2022cites this paper
• How metal augments, polyethylene thickness and stem length affect tibial baseplate load transfer in revision total knee arthroplasty.

  2022cites this paper
• Finite Element Analysis of Contact Stress Distribution on Insert Conformity Design of Total Knee Arthroplasty

  2022influential citation
• Oxidation in Retrieved, Never-Irradiated UHMWPE Bearings

  2022cites this paper
• Evaluation of the result of total knee replacement in various arthritic condition of knee

  2022cites this paper
• Robotic‐arm assisted total knee arthroplasty has a learning curve of 16 cases and increased operative time of 12 min

  2022cites this paper
• Modular-Metal Backed Tibial Components Provide Minimal Mid-Term Survivorship Benefits Despite Increased Cost and Frequency of Use: A Retrospective Review of the AJRR Database.

  2022cites this paper
• Contact stress and sliding wear damage tolerance of hydroxyapatite and carbon nanotube reinforced polyethylene cup liner against zirconia femoral head.

  2022cites this paper
• Fixed- Versus Mobile-Bearing Total Knee Arthroplasty

  2022cites this paper
• All-Polyethylene Tibial Components in Primary Total Knee Arthroplasty: Why It Works and Why I Do Not Use It Anymore?

  2022cites this paper
• The Role of Dual-Mobility Components in Total Hip Arthroplasty

  2022cites this paper
• Computer-based analysis of different component positions and insert thicknesses on tibio-femoral and patello-femoral joint dynamics after cruciate-retaining total knee replacement.

  2022cites this paper
• In vitro evaluation of delamination resistance of PEEK and CFR-PEEK

  2021cites this paper
• Wear and performance of a tripolar total hip replacement

  2021cites this paper
• The effect of polyethylene thickness on revision rates of contemporary cruciate retaining knee replacements. A registry analysis.

  2021cites this paper
• Biomechanical Consequences of Tibial Insert Thickness after Total Knee Arthroplasty: A Musculoskeletal Simulation Study

  2021cites this paper
• Vitamin E-enriched polyethylene bearings are not inferior to Arcom bearings in primary total knee arthroplasty at medium-term follow-up

  2021cites this paper
• Failure mechanisms in joint replacement

  2021cites this paper
• Polyethylene in Orthopedic Implants: Recent Trends and Limitations

  2021cites this paper
• Morphology and Plastic Yielding of Ultrahigh Molecular Weight Polyethylene

  2020cites this paper
• Cellular Response of Metallic Materials and Microstructure Entropy Guided Understanding of Strength in Biomedical Austenitic Stainless Steels

  2020cites this paper
• Comparison of all‐polyethylene and metal‐backed modular tibial components in endoprosthetic reconstruction of the distal femur

  2020cites this paper
• Alumina and tricalcium phosphate added CoCr alloy for load-bearing implants.

  2020cites this paper
• Bearing Thickness Is Not a Predictive Factor for Damage and Penetration in Oxford Unicompartmental Knee Arthroplasty—A Retrieval Analysis

  2020cites this paper
• Effect of material selection on tibial post stresses in posterior-stabilized knee prosthesis

  2020cites this paper
• Titanium-Silicon on CoCr Alloy for Load-Bearing Implants Using Directed Energy Deposition-Based Additive Manufacturing.

  2020cites this paper
• Bearing thickness of unicompartmental knee arthroplasty is a reliable predictor of tibial bone loss during revision to total knee arthroplasty.

  2020cites this paper
• Comparative Studies of Conventional and Cross-linked Implants and Explants

  2020cites this paper
• Biomechanical and Clinical Effect of Patient-Specific or Customized Knee Implants: A Review

  2020cites this paper
• The Effect of Polyethylene Liner Thickness on Patient Outcomes and Failure After Primary Total Knee Arthroplasty.

  2020cites this paper
• Design Modifications of the Posterior-Stabilized Knee System May Reduce Anterior Knee Pain and Complications Following Total Knee Replacement

  2020cites this paper
• Minimum 10-year outcomes of a fixed bearing all-polyethylene unicompartmental knee arthroplasty used to treat medial osteoarthritis.

  2020cites this paper
• Influence of Congruency Design on the Contact Stress of a Novel Hinged Knee Prosthesis Using Finite Element Analysis

  2020cites this paper
• Optimal Design of Patient-Specific Total Knee Arthroplasty for Improvement in Wear Performance

  2019cites this paper
• Evaluating the durability of UHMWPE biomaterials used for articulating surfaces of joint arthroplasty using delamination tests.

  2019cites this paper
• Computational Model Validation of Contact Mechanics in Total Ankle Arthroplasty

  2019cites this paper
• Cemented all-poly tibia in resource constrained country, affordable and cost-effective care. Is it applicable at this era? Review article

  2019cites this paper
• Ten- to Sixteen-Year Follow-Up of Highly Cross-Linked Polyethylene in Total Hip Arthroplasty: What Factors Affect Wear?

  2019cites this paper
• All-polyethylene tibial components in young patients have stable fixation; a comparison RSA study.

  2019cites this paper
• Metal-Backed Tibial Components Do Not Reduce Risk of Early Aseptic Loosening in Unicompartmental Knee Arthroplasty: A Systematic Review and Meta-Analysis

  2019cites this paper
• Short-term differences in anterior knee pain and clinical outcomes between rotating and fixed platform posterior stabilized total knee arthroplasty with a new femoral component design

  2019cites this paper
• The Long-Term Results of Simultaneous High-Flexion Mobile-Bearing and Fixed-Bearing Total Knee Arthroplasties Performed in the Same Patients.

  2019cites this paper
• Crack initiation from a clinically relevant notch in a highly-crosslinked UHMWPE subjected to static and cyclic loading.

  2019cites this paper
• Does lateral lift-off occur in static and dynamic activity in a medially spherical total knee arthroplasty? A pulsed-fluoroscopic investigation

  2019cites this paper
• "Thicker" Polyethylene Bearings Are Not Associated With Higher Failure Rates in Primary Total Knee Arthroplasty.

  2018cites this paper
• A case of bilateral revision total knee arthroplasty using distal femoral allograft–prosthesis composite and femoral head allografting at the tibial site with a varus-valgus constrained prosthesis: ten-year follow up

  2018cites this paper
• Clinical Results of Fixed-Bearing and Rotating-Platform Total Knee Prostheses.

  2018cites this paper
• What Is the Incidence of Cobalt-Chromium Damage Modes on the Bearing Surface of Contemporary Femoral Component Designs for Total Knee Arthroplasty?

  2018cites this paper
• Squeaking in fourth-generation ceramic-on-ceramic total hip replacement and the relationship with prosthesis brands: meta-analysis and systematic review

  2018cites this paper
• Comparison of High-Flexion Fixed-Bearing and High-Flexion Mobile-Bearing Total Knee Arthroplasties-A Prospective Randomized Study.

  2018cites this paper
• Development and evaluation of a polyethylene knee insert with integrated wear sensors

  2018cites this paper
• Static mode fatigue crack propagation and generalized stress intensity correlation for fatigue–brittle polymers

  2018cites this paper
• Low velocity impact analysis on composite structures – A review

  2018cites this paper
• The custom total knee replacement: A bespoke solution

  2018cites this paper
• Medium-term follow-up of 149 mobile-bearing total knee arthroplasties and evaluation of prognostic factors influencing outcomes

  2018cites this paper
• Effect of Total Knee Replacement Conformity on Articular Constraint in Mechanical Testing

  2018cites this paper
• Risk factors for conversion surgery to total hip arthroplasty of a hemiarthroplasty performed for a femoral neck fracture.

  2018cites this paper
• Antioxidant‐stabilized highly crosslinked polyethylene in total knee arthroplasty: A RETRIEVAL ANALYSIS

  2018cites this paper
• Risk factors for conversion surgery to total hip arthroplasty of a hemiarthroplasty performed for a femoral neck fracture

  2018cites this paper
• A new constitutive model for polymeric matrices: Application to biomedical materials

  2018cites this paper
• A long term clinical outcome of the Medial Pivot Knee Arthroplasty System.

  2017cites this paper
• P.F.C Sigma® cruciate retaining fixed-bearing versus mobile-bearing knee arthroplasty: a prospective comparative study with minimum 10-year follow-up

  2017cites this paper
• Biomechanics of the knee joint, as they relate to arthroplasty

  2017cites this paper
• Mid-Term Outcomes of Metal-Backed Unicompartmental Knee Arthroplasty Show Superiority to All-Polyethylene Unicompartmental and Total Knee Arthroplasty

  2017cites this paper
• All-polyethylene tibial components in distal femur limb-salvage surgery: a finite element analysis based on promising clinical outcomes

  2017cites this paper
• THE INFLUENCE OF MEDIAL-LATERAL CONTACT PAIR CONFORMITY ON CONTACT STRESSES IN TOTAL KNEE REPLACEMENT

  2017cites this paper
• Unicompartmental knee arthroplasty: state of the art

  2017cites this paper
• 7.10 Wear: Knee Joint Arthroplasty

  2017cites this paper