A convenient approach for finite-element-analyses of orthopaedic implants in bone contact: Modeling and experimental validation

No abstract is available for this paper.

• Publication year

  2009

• Venue

  Comput. Methods Programs Biomed.

• Publication date

  2009-07-01

• Fields of study

  Medicine, Computer Science, Engineering

• Identifiers
  DOI 10.1016/j.cmpb.2009.01.004PMID 19231021
• External record

  Open on Semantic Scholar

• Source metadata

  Semantic Scholar, PubMed

• No claims are published for this paper.

• No concepts are published for this paper.

• Finite-Elemente-Untersuchung zur Impingement-bedingten Schädigung von Implantaten für den Hüftgelenkersatz

  2007cited by this paper
• [Finite element analysis of a cemented ceramic femoral component for the assembly situation in total knee arthroplasty].

  2007cited by this paper
• Influence of femoral head size on impingement, dislocation and stress distribution in total hip replacement.

  2007cited by this paper
• Finite-Elemente-Analyse einer zementierten, keramischen Femurkomponente unter Berücksichtigung der Einbausituation bei künstlichem Kniegelenkersatz / Finite element analysis of a cemented ceramic femoral component for the assembly situation in total knee arthroplasty

  2007cited by this paper
• Tibial forces measured in vivo after total knee arthroplasty.

  2006cited by this paper
• Finite element contact analysis of the hip joint

  2006cited by this paper
• The Potential for Bone Loss in Acetabular Structures Following THA

  2006influential reference
• A Subject-Specific Finite Element Model of the Pelvis : Development , Validation and Sensitivity Studies

  2005cited by this paper
• Biomechanical study of load transfer of the pubic ramus due to pelvic inclination after hip joint surgery using a three-dimensional finite element model

  2004cited by this paper
• Relation between vertical orientation and stability of acetabular component in the dysplastic hip simulated by nonlinear three-dimensional finite element method.

  2004cited by this paper
• Designing a general software system for musculoskeletal analysis

  2003cited by this paper
• Effects of acetabular resurfacing component material and fixation on the strain distribution in the pelvis

  2002influential reference
• The effect of interfacial parameters on cup-bone relative micromotions. A finite element investigation.

  2001cited by this paper
• Hip contact forces and gait patterns from routine activities.

  2001cited by this paper
• Three-dimensional finite element analysis of several internal and external pelvis fixations.

  2000cited by this paper
• Analysis of the structural behavior of the pelvis during lateral impact using the finite element method.

  1999cited by this paper
• Load transfer across the pelvic bone.

  1995cited by this paper
• Development and validation of a three-dimensional finite element model of the pelvic bone.

  1995cited by this paper
• Relations of mechanical properties to density and CT numbers in human bone.

  1995cited by this paper
• Predicting the compressive mechanical behavior of bone.

  1994cited by this paper
• Hip joint loading during walking and running, measured in two patients.

  1993cited by this paper
• Mechanical and textural properties of pelvic trabecular bone.

  1993cited by this paper
• Estimation of mechanical properties of cortical bone by computed tomography

  1991cited by this paper

• Computational evaluation of the impact of low-modulus beta-titanium alloys on stress shielding of tibial trays in cementless total knee replacements

  2025cites this paper
• Conceptual Design and Additive Manufacturing of a Bidirectional Gradient Gyroid Structure for Tibial Stem

  2025cites this paper
• Systematic biomechanical evaluation of different dental implant materials at various bone stock conditions using a statistical and subject-specific computer-based workflow.

  2025cites this paper
• Advancements in High-Resolution Computed Tomography: Revolutionising Bone Health Micro-Research

  2025cites this paper
• How accurately do finite element models predict the fall impact response of ex vivo specimens augmented by prophylactic intramedullary nailing?

  2024cites this paper
• Kinematic-kinetic compliant acetabular cup positioning based on preoperative motion tracking and musculoskeletal modeling for total hip arthroplasty.

  2024cites this paper
• The Morphology of the Femur Influences the Fracture Risk during Stumbling and Falls on the Hip—A Computational Biomechanical Study

  2024cites this paper
• Finite element modeling of stress distribution and safety factors in a Ti-27Nb alloy hip implant under real-world physiological loading scenarios

  2024cites this paper
• Small design modifications can improve the primary stability of a fully coated tapered wedge hip stem

  2024cites this paper
• Evaluate the effect of bone density variation on stress distribution at the bone–implant interface using numerical analysis

  2024cites this paper
• Heterogeneous material models for finite element analysis of the human mandible bone – A systematic review

  2024cites this paper
• Corroboration of coupled musculoskeletal model and finite element predictions with in vivo RSA migration of an uncemented acetabular component

  2023cites this paper
• Efficient Computer-Based Method for Adjusting the Stiffness of Subject-Specific 3D-Printed Insoles during Walking

  2023cites this paper
• Influence of stem design parameters on periprosthetic femoral fractures examined by subject specific finite element analyses.

  2023cites this paper
• An artefact-based workflow for finite element simulation studies

  2022cites this paper
• An investigation of the inelastic behaviour of trabecular bone during the press-fit implantation of a tibial component in total

  2022cites this paper
• Investigation of the Influence of Osteoporosis and Aging on Periprosthetic Femoral Fractures using Finite Element Analyses

  2022cites this paper
• LibHip: An open-access hip joint model repository suitable for finite element method simulation

  2022cites this paper
• Biomechanics of the medial meniscus in the osteoarthritic knee joint

  2021cites this paper
• Numerical Simulation of Electric Field Distribution around an Instrumented Total Hip Stem

  2021cites this paper
• Análise de elementos finitos de um dispositivo de dinamização controlada para fixação circular externa

  2021cites this paper
• Biomechanik des endoprothetisch versorgten Kniegelenks

  2021cites this paper
• An MRI-Based Patient-Specific Computational Framework for the Calculation of Range of Motion of Total Hip Replacements

  2021cites this paper
• Finite Element Analysis of a Controlled Dynamization Device for External Circular Fixation

  2021cites this paper
• Subject specific finite element modelling of periprosthetic femoral fractures in different load cases.

  2021cites this paper
• Medially positioned plate in first metatarsophalangeal joint arthrodesis

  2021cites this paper
• Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction.

  2021cites this paper
• An Artifact-based Workflow for Finite-Element Simulation Studies

  2020cites this paper
• Present and future for technologies to develop patient-speci fi c medical devices: a systematic review approach

  2020cites this paper
• Present and future for technologies to develop patient-speci fi c medical devices: a systematic review approach

  2020cites this paper
• Intralesional curettage versus Prosthetic replacement,which approach is suitable for bone tumors ?------ A finite element analysis of limb salvage simulation in biomechanics

  2020cites this paper
• Einfluss morphologischer Parameter auf die Steifigkeit des proximalen humanen Femurs bei den Lastfällen Stolpern und seitlicher Sturz auf die Hüfte - Eine Finite-Elemente-Analyse

  2020cites this paper
• WITHDRAWN: Intralesional curettage versus prosthetic replacement, which approach is suitable for GCT?------ A finite element biomechanics analysis of limb-salvage simulation

  2020cites this paper
• Stress and strain distribution in femoral heads for hip resurfacing arthroplasty with different materials: A finite element analysis.

  2020cites this paper
• Intralesional curettage versus prosthetic replacement for bone tumors - a finite element analysis case of limb salvage simulation in biomechanics

  2020cites this paper
• Finite element analysis of Bi-condylar Tibial Plateau fractures to assess the effect of coronal splits.

  2020cites this paper
• Image-based finite-element modeling of the human femur

  2020cites this paper
• Biomechanical analysis for five fixation techniques of Pauwels-III fracture by finite element modeling

  2020cites this paper
• Influence of the Acetabular Cup Material on the Shell Deformation and Strain Distribution in the Adjacent Bone—A Finite Element Analysis

  2020cites this paper
• COMPARATIVE ANALYSIS FOR THREE FIXTURES OF PAUWELLS-II BY THE BIOMECHANICAL FINITE ELEMENT METHOD

  2020cites this paper
• Plating System Design Determines Mechanical Environment in Long Bone Mid-shaft Fractures: A Finite Element Analysis

  2020cites this paper
• FORENSIC IMPLICATIONS OF OSTEO- ARTICULAR INJURIES PRODUCED IN TRAFFIC ACCIDENTS

  2019cites this paper
• Significance of Orthotropic Material Models to Predict Stress Around Bone-Implant Interface Using Numerical Simulation

  2019cites this paper
• Finite Element Analysis in Orthopaedic Biomechanics

  2019cites this paper
• Surgically Relevant Morphological Parameters of Proximal Human Femur: A Statistical Analysis Based on 3D Reconstruction of CT Data

  2019cites this paper
• A round-robin finite element analysis of human femur mechanics between seven participating laboratories with experimental validation

  2019cites this paper
• Neuro-musculoskeletal flexible multibody simulation yields a framework for efficient bone failure risk assessment

  2019cites this paper
• Present and future for technologies to develop patient-specific medical devices: a systematic review approach

  2019cites this paper
• Significance of Orthotropic Material Models to Predict Stress Around Bone-Implant Interface Using Numerical Simulation

  2019cites this paper
• Factors That Influence Bone-Ingrowth Fixation of Press-Fit Acetabular Cups.

  2019cites this paper
• Effect of surgical parameters on the biomechanical behaviour of bicondylar total knee endoprostheses – A robot-assisted test method based on a musculoskeletal model

  2019cites this paper
• Separate modeling of cortical and trabecular bone offers little improvement in FE predictions of local structural stiffness at the proximal tibia

  2019cites this paper
• The Effect of Trabecular Modulus Anatomic Site Selection on FE Outcomes for Shoulder Arthroplasty.

  2019cites this paper
• Bones don’t lie: What does bone shape tell us about skeletal diseases?

  2018cites this paper
• Interlaboratory comparison of femur surface reconstruction from CT data compared to reference optical 3D scan

  2018cites this paper
• Novel implant for peri-prosthetic proximal tibia fractures.

  2018cites this paper
• The effect of stemless humeral component fixation feature design on bone stress and strain response: a finite element analysis.

  2018cites this paper
• Finite Element Models of the Knee Joint

  2018cites this paper
• Comparative analysis for five fixations of Pauwels-I by the biomechanical finite-element method

  2018cites this paper
• Computer-aided design, finite element analysis and material-model optimisation of knee prosthesis

  2018cites this paper
• Modelling of the bonding process in powder forging

  2017cites this paper
• Patient‐specific in silico models can quantify primary implant stability in elderly human bone

  2017cites this paper
• A novel in silico method to quantify primary stability of screws in trabecular bone

  2017cites this paper
• Advances in metals and alloys for joint replacement

  2017cites this paper
• Finite Element Investigation of the Effects of the Cup Orientation on Implant Load-bearing in Total Hip Resurfacing

  2017cites this paper
• An investigation of the inelastic behaviour of trabecular bone during the press-fit implantation of a tibial component in total

  2017cites this paper
• Numerical simulation of mechanically stimulated bone remodelling

  2016cites this paper
• An automatic approach for calibrating dielectric bone properties by combining finite-element and optimization software tools

  2016cites this paper
• Computer assisted preoperative planning of bone fracture reduction: Simulation techniques and new trends

  2016cites this paper
• Multiscale musculoskeletal modeling of the lower limb to perform personalized simulations of movement

  2016cites this paper
• Finite Element Analysis Study of the Influence of Simulated Surgical Methods on Kinematics of a Model of the Full Cervical Spine

  2016cites this paper
• The Influence of Articular Cartilage Thickness Reduction on Meniscus Biomechanics

  2016cites this paper
• Development of a novel micro-structural finite element approach to model fracture fixation in osteoporotic human bone

  2016cites this paper
• Comparisons of node-based and element-based approaches of assigning bone material properties onto subject-specific finite element models.

  2015cites this paper
• TO WHAT EXTENT THE COMBINATION OF STEM LENGTH AND STEM INCLINATION DO AFFECT THE PERFORMANCE OF THE TIBIAL COMPONENT IN KNEE IMPLANTS

  2015cites this paper
• A Novel Approach for Dynamic Testing of Total Hip Dislocation under Physiological Conditions

  2015cites this paper
• Friction coefficient and effective interference at the implant-bone interface.

  2015cites this paper
• Multiscale stress analysis of trabecular bone around acetabular cup implant by finite element mesh superposition method

  2015cites this paper
• Biomechanical Analysis of Selected Endoprostheses of Hip Joint by Means of Finite Element Methods

  2015cites this paper
• Physiological-Like Testing of the Dislocation Stability of Artificial Hip Joints

  2015cites this paper
• Computational analysis of primary implant stability in trabecular bone.

  2015cites this paper
• Effects of densitometry, material mapping and load estimation uncertainties on the accuracy of patient-specific finite-element models of the scapula

  2014cites this paper
• An Automatic Modeling Approach for Optimized Positioning of an Electrostimulative Implant in the Human Femoral Head

  2014cites this paper
• External fixator configurations in tibia fractures: 1D optimization and 3D analysis comparison

  2014cites this paper
• Statistical shape and appearance models of bones.

  2014cites this paper
• Numerical optimization of open-porous bone scaffold structures to match the elastic properties of human cortical bone.

  2014cites this paper
• Does surface roughness influence the primary stability of acetabular cups? A numerical and experimental biomechanical evaluation.

  2014cites this paper
• The Effect of High Tibial Osteotomy Correction Angle on Cartilage and Meniscus Loading Using Finite Element Analysis

  2014cites this paper
• Evaluation of electric field distribution in electromagnetic stimulation of human femoral head

  2014cites this paper
• Finite Element Analysis on Iliosacral Screw Fixation for Sacral Stress Fracture: A Comparison between Three Systems

  2014cites this paper
• Evaluating a suitable level of model complexity for finite element analysis of the intact acetabulum

  2013influential citation
• Finite element analysis on the biomechanical stability of open porous titanium scaffolds for large segmental bone defects under physiological load conditions.

  2013cites this paper
• [Applications of numerical simulation in musculoskeletal research and its impact on orthopedic surgery].

  2013cites this paper
• Finite Element Analysis for Double Anterior Cruciate Ligament Reconstruction Analysis

  2013cites this paper
• Socket modelling assistant for prosthesis design

  2013cites this paper
• Numerische Modelle in Orthopädie und Unfallchirurgie

  2013influential citation
• The influence of head diameter and wall thickness on deformations of metallic acetabular press-fit cups and UHMWPE liners: a finite element analysis

  2013cites this paper
• Einsatzgebiete der numerischen Simulation in der muskuloskelettalen Forschung und ihre Bedeutung für die Orthopädische Chirurgie

  2013cites this paper
• Subject-specific finite element simulation of the human femur considering inhomogeneous material properties: A straightforward method and convergence study

  2013cites this paper
• An investigation of the inelastic behaviour of trabecular bone during the press-fit implantation of a tibial component in total knee arthroplasty.

  2013cites this paper