Wear mechanisms analysis for turning Ti-6Al-4V—towards the development of suitable tool coatings

No abstract is available for this paper.

• Publication year

  2012

• Venue

  The International Journal of Advanced Manufacturing Technology

• Publication date

  Unknown publication date

• Fields of study

  Materials Science, Engineering

• Identifiers
  DOI 10.1007/S00170-011-3427-Y
• External record

  Open on Semantic Scholar

• Source metadata

  Semantic Scholar

• No claims are published for this paper.

• No concepts are published for this paper.

• On the heat partition properties of (Ti, Al)N compared with TiN coating in high-speed machining

  2009cited by this paper
• Study of the use of wear maps for assessing machining performance

  2009cited by this paper
• Assessment of the machinability of Ti-6Al-4V alloy using the wear map approach

  2009cited by this paper
• High Productivity Rough Turning of Ti-6Al-4V Alloy, with Flood and High-Pressure Cooling

  2009cited by this paper
• Mechanical properties of hard AlCrN-based coated substrates

  2009cited by this paper
• High speed milling of Ti-6Al-4V using coated carbide tools

  2008cited by this paper
• Titanium aluminide coating on titanium surface using three-dimensional microwelder

  2008cited by this paper
• Comparison of tribological behaviours of AlCrN and TiAlN coatings—Deposited by physical vapor deposition

  2007cited by this paper
• Performance of coated- and uncoated-carbide tools when drilling titanium alloy—Ti–6Al4V

  2007cited by this paper
• Growth of tool wear in turning of Ti-6Al-4V alloy under cryogenic cooling

  2007cited by this paper
• Investigating the correlation between nano-impact fracture resistance and hardness/modulus ratio from nanoindentation at 25–500 °C and the fracture resistance and lifetime of cutting tools with Ti1−xAlxN (x = 0.5 and 0.67) PVD coatings in milling operations

  2007cited by this paper
• Effectiveness of uncoated WC–Co and PCD inserts in end milling of titanium alloy—Ti–6Al–4V

  2007influential reference
• Performance of alloyed uncoated and CVD-coated carbide tools in dry milling of titanium alloy Ti-6242S

  2007cited by this paper
• Wear characteristics and performance of multi-layer CVD-coated alloyed carbide tool in dry end milling of titanium alloy

  2006cited by this paper
• Structural and mechanical properties of AlTiN/CrN coatings synthesized by a cathodic-arc deposition process

  2006cited by this paper
• The Effect of Cutting Tool Material and Edge Geometry on Tool Life and Workpiece Surface Integrity

  2006cited by this paper
• Damage modes of straight tungsten carbide in dry machining of titanium alloy TA6V

  2006cited by this paper
• Modern coatings in high performance cutting applications

  2006cited by this paper
• Experimental and numerical studies on the performance of alloyed carbide tool in dry milling of aerospace material

  2006cited by this paper
• Characterisation and wear response of metal-boride coated WC–Co

  2005cited by this paper
• Binderless CBN tools, a breakthrough for machining titanium alloys

  2005cited by this paper
• Evaluation of the performance of CBN tools when turning Ti-6Al-4V alloy with high pressure coolant supplies

  2005cited by this paper
• The Effect of Argon-Enriched Environment in High-Speed Machining of Titanium Alloy

  2005cited by this paper
• High speed machining of aero-engine alloys

  2004cited by this paper
• The effect of tool edge preparation on tool life and workpiece surface integrity

  2004cited by this paper
• Computer Simulation of Orthogonal Cutting using a Tool with Multiple Coatings

  2004cited by this paper
• Tool performance and attainable surface quality during the machining of aerospace alloys using self-propelled rotary tools

  2004cited by this paper
• Engineering Materials For Biomedical Applications

  2004cited by this paper
• Lathe Turning of Titanium Using Pulsed Laser Deposited, Ultra‐Hard Boride Coatings of Carbide Inserts

  2003cited by this paper
• Optimization of titanium alloy (6Al–4V) machining

  2003cited by this paper
• Oxidation resistance of Cr1-XAlXN and Ti1-XAlXN films

  2003cited by this paper
• Stability of up-milling and down-milling, part 1: alternative analytical methods

  2003cited by this paper
• Wear Mechanisms of New Tool Materials for Ti-6AI-4V High Performance Machining

  2003cited by this paper
• Development of CVD WC–Co coatings ☆

  2001cited by this paper
• Wear mechanisms of ultra-hard cutting tools materials

  2001cited by this paper
• Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy

  2000cited by this paper
• Advanced cutting conditions for the milling of aeronautical alloys

  2000cited by this paper
• Wear of Coated Carbide Tools When Machining Nickel (Inconel 718) and Titanium Base (Ti-6A1-4V) Alloys

  2000cited by this paper
• Evaluation of a self-propelled rotary tool in the machining of aerospace materials

  1998cited by this paper
• Titanium alloys and their machinability—a review

  1997cited by this paper
• Performance of PVD-Coated Carbide Tools When Machining Ti-6Al-4V©

  1997influential reference
• Mechanical and physical properties of engineering alumina ceramics

  1996cited by this paper
• An overview on the use of titanium in the aerospace industry

  1996cited by this paper
• Wear maps for some uncoated cutting tools

  1996influential reference
• Machining Ti6Al4V alloy with a wBN-cBN composite tool

  1995cited by this paper
• Aerospace structural metals handbook

  1995cited by this paper
• Today's applications and future developments of coatings for drills and rotating cutting tools

  1995cited by this paper
• Elastic constants and planar fault energies of Ti3Al, and interfacial energies at the interface by first-principles calculations

  1995cited by this paper
• Theoretical Consideration of Rare Earth Metal Compounds as Tool Materials for Titanium Machining

  1993influential reference
• Handbook of chemical vapor deposition (CVD) : principles, technology, and applications

  1992cited by this paper
• Evaluation of principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy IMI 318

  1986cited by this paper
• High temperature oxidation resistant coatings. Final report October 1983-April 1984

  1984cited by this paper
• Evaluation of carbide grades and a new cutting geometry for machining titanium alloys

  1983influential reference
• Study on Machining of Titanium Alloys

  1983cited by this paper
• Some clarifications on the mechanics of chip formation when machining titanium alloys

  1982cited by this paper
• Tool wear in titanium machining

  1982cited by this paper
• New observations on the mechanism of chip formation when machining titanium alloys

  1981cited by this paper
• Wear of cutting tools

  1972cited by this paper
• The tool wear-time relationship in metal cutting

  1962cited by this paper
• Metal Cutting Principles

  1960influential reference
• Solubility of the elements in titanium

  1954influential reference

• Towards understanding wear mechanisms of Parallel Ultrasonic Vibration-assisted Cutting

  2025cites this paper
• Evaluation of Bonding Strength between WC Grains in WC-Co and WC-VC-Co Cemented Carbides

  2025cites this paper
• Investigation of wear behavior for large pulsed electron beam irradiated cutting tools under the turning process of Ti-6Al-4V

  2025cites this paper
• Mitigating the tribological challenges in machining Ti6Al4V using tool texturing and deep cryogenic treatment techniques

  2025cites this paper
• Analysis of TiAlSiN coating performance in machining Inconel 718

  2025cites this paper
• A comprehensive study of CrN/AlCrN-based monolayers and architected multilayers

  2025cites this paper
• Temperature-induced wear micro-mechanism transition in additively deposited nickel alloys with different solid lubricants

  2024cites this paper
• Investigation of tool wear and energy consumption in machining Ti6Al4V alloy with uncoated tools

  2024influential citation
• Tribocorrosion behavior of TC18 titanium alloy: A discussion about the interaction between galvanic corrosion and wear

  2024cites this paper
• Experimental investigation of micro-pillar textured WC inserts during turning of Ti6Al4V under various cutting fluid strategies

  2024cites this paper
• Study on the Wear Mechanism of High-Entropy Alloy Coated Tools and Grain Evolution in Micro-Cutting of TC4 Titanium Alloy

  2024cites this paper
• Machinability Performance of Single Coated and Multicoated Carbide Tools During Turning Ti6Al4V Alloy

  2024influential citation
• A new characterization methodology for assessing machinability through cutting energy consumption

  2024cites this paper
• Wear behavior of novel CVD-coated wiper inserts’ with various chip-breakers and resulting surface integrity during dry drilling of Ti-6Al-4V.

  2024cites this paper
• Design and application of B-containing hard coatings for high-speed dry cutting against Ti-alloys- A review

  2024cites this paper
• Effect of cooling technique and tool material on Ti6Al4V alloy

  2023cites this paper
• Effect of Graphite Powder Addition on Microstructure and Room Temperature Mechanical Properties of Ti-45Al-8Nb Alloys

  2023cites this paper
• Influence of nanoparticle concentration in nanofluid MQL on cutting forces, tool wear, chip morphology when milling of Inconel 718

  2023cites this paper
• Investigation on the ultra-precision diamond turning of ZnSe aspheric surfaces using straight-nosed cutting tools

  2023cites this paper
• On the cutting performance and chip characteristics of WNbMoTaZr0.5 refractory high entropy alloy

  2023cites this paper
• Machinability analysis of Ti-6Al-4V under cryogenic condition  

  2023cites this paper
• Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions

  2023cites this paper
• Effect of high-speed steel screw drill geometry on cutting performance when machining austenitic stainless steel

  2023cites this paper
• In pursuit of sustainability in machining thin walled α‑titanium tubes: An industry supported study

  2023cites this paper
• Evaluation of specific cutting energy, tool wear, and surface roughness in dry turning of titanium grade 3 alloy

  2023cites this paper
• Tool surface modification methodology to improve the machinability of Ti6Al4V through combination of micro-EDM texturing and AlSi-10Mg soft coating techniques in dry turning

  2023cites this paper
• Adhesive wear of TiAlN coatings during low speed turning of stainless steel 316L

  2023cites this paper
• A Novel magnetic field assisted diamond turning of Ti-6Al-4V alloy for sustainable ultra-precision machining

  2023cites this paper
• Effect of cooling technique and tool material on Inconel alloy

  2023cites this paper
• Manufacturing Methods Induced Property Variations in Ti6Al4V Using High-Speed Machining and Additive Manufacturing (AM)

  2023cites this paper
• A Methodology for Tribo-Mechanical Characterization of Metallic Alloys under Extreme Loading and Temperature Conditions Typical of Metal Cutting Processes

  2022cites this paper
• Statistical Analysis of Surface Roughness, Burr Formation and Tool Wear in High Speed Micro Milling of Inconel 600 Alloy under Cryogenic, Wet and Dry Conditions

  2022cites this paper
• Dry machining of Ti–6Al–4V using PVD Si-doped TiAlxN super nitride (HSN2) coated WC–Co tool

  2022cites this paper
• A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates

  2022cites this paper
• Investigation of Experimental and Statistical (Respond Surface Method and Grey Relational Analysis) of Surface Roughness, Vibration and Enerrgy consumption Values of Titanium Alloy During Machining

  2021cites this paper
• The effect of micro-texture on wear resistance of WC/Co-based tools during cutting Ti-6Al-4V

  2021cites this paper
• Optimization of Surface Roughness and Material Removal Rate on Conventional Dry Turning of Tool H13

  2021cites this paper
• Wear mechanism and experimental study of a tool used for micro-milling single-crystal nickel-based superalloys

  2021cites this paper
• Development and analysis of tool wear and energy consumption maps for turning of titanium alloy (Ti6Al4V)

  2021influential citation
• Investigation of the Wear Behavior of PVD Coated Carbide Tools during Ti6Al4V Machining with Intensive Built Up Edge Formation

  2021cites this paper
• Characterisation of worn WC tool using STEM‐EDS aided by principal component analysis

  2021cites this paper
• An Analysis on Tool-Chip Interaction During Dry Machining of SS316 Using Textured Carbide Tools

  2021cites this paper
• Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining

  2021cites this paper
• Experimental investigations into the influence of AlSi-10Mg soft tool coating on the machinability of Ti6Al4V

  2021cites this paper
• Micromechanical characterization and dynamic wear study of DC-Arc coated cemented carbide cutting tools for dry titanium turning

  2021cites this paper
• Machining of titanium alloys for medical application - a review

  2021cites this paper
• Precision Hard Turning of Ti6Al4V Using Polycrystalline Diamond Inserts: Surface Quality, Cutting Temperature and Productivity in Conventional and High-Speed Machining

  2020cites this paper
• Improvement in performance of cryogenically treated tungsten carbide tools in face milling of Ti-6Al-4V alloy

  2020cites this paper
• Development of specific cutting energy map for sustainable turning: a study of Al 6061 T6 from conventional to high cutting speeds

  2020cites this paper
• Wear behavior and mechanism of TiB2-based ceramic inserts in high-speed cutting of Ti6Al4V alloy

  2020cites this paper
• Energy Consumption Analysis in Turning Ti-6Al-4V alloy

  2020cites this paper
• Machinability of Ti–6Al–4V Superalloy: Performance of Dry Cutting and Nanofluid MQL (MWCNT-Added Rice Bran Oil)

  2020cites this paper
• Studies on chip morphology and modes of tool wear during machining of Ti-6Al-4V using uncoated carbide tool: application of multi-walled carbon nanotubes added rice bran oil as nanocutting fluid

  2020cites this paper
• Investigation on PCD cutting edge geometry for Ti6Al4V high-feed milling

  2020cites this paper
• Parametric optimization while turning Ti-6Al-4V alloy in Mist-MQCL (Green environment) using the DEAR method

  2020cites this paper
• Development of specific cutting energy map for sustainable turning: a study of Al 6061 T6 from conventional to high cutting speeds

  2020cites this paper
• Machinability of Ti–6Al–4V Superalloy: Performance of Dry Cutting and Nanofluid MQL (MWCNT-Added Rice Bran Oil)

  2020cites this paper
• Lifespan of super-alloy Waspaloy cutting tools

  2019cites this paper
• Multi-objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP)

  2019cites this paper
• Wear Progression and its Effect on Energy Consumption in Turning of Titanium Alloy ( Ti-6 Al-4 V )

  2019cites this paper
• Study on predictive modeling for thermal wear of uncoated carbide tool during machining of Ti–6Al–4V

  2019cites this paper
• Preparation and characterization of electrodeposited Ni–TiC, Ni–TiN, and Ni–TiC–TiN composite coatings on tungsten carbide cutting tool

  2019cites this paper
• Tool Wear Progression and its Effect on Energy Consumption in Turning of Titanium Alloy (Ti-6Al-4V)

  2019cites this paper
• Development of energy consumption map for orthogonal machining of Al 6061-T6 alloy

  2018cites this paper
• Effects of intense cooling on microstructure and properties of friction-stir-welded Ti–6Al–4V alloy

  2018cites this paper
• Performance evaluation of PVD TIALN coated carbide tools vis-à-vis uncoated carbide tool in turning of titanium alloy (Ti-6Al-4V) by simultaneous minimization of cutting energy, dimensional deviation and tool wear

  2018cites this paper
• Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy

  2018cites this paper
• Machining Performance of TiAlN-Coated Cemented Carbide Tools with Chip Groove in Machining Titanium Alloy Ti-6Al-0.6Cr-0.4Fe-0.4Si-0.01B

  2018cites this paper
• Predictive modeling for material microstructure affected machining

  2018cites this paper
• Development and analysis of energy consumption map for high-speed machining of Al 6061-T6 alloy

  2018cites this paper
• Cutting performance and wear mechanism of TiB2-B4C ceramic cutting tools in high speed turning of Ti6Al4V alloy

  2018cites this paper
• The mechanical behaviours of the Ti-10V-2Fe-3Al alloy under the high-temperature and dynamic loading conditions

  2018cites this paper
• Multi-process parameter optimization in face milling of Ti6Al4V alloy using response surface methodology

  2018cites this paper
• On the machinability of directed energy deposited Ti6Al4V

  2018cites this paper
• Development and analysis of energy consumption map for high-speed machining of Al 6061-T6 alloy

  2018cites this paper
• Some observations on flood and dry finish turning of the Ti-6Al-4V aerospace alloy with carbide and PCD tools

  2018cites this paper
• Performance Of CVD Coated Carbide Tool by Optimizing Machining Parameters During Turning Titanium Alloy TI-6AL-4V ELI In Flooded Condition

  2018cites this paper
• Some observations on flood and dry finish turning of the Ti-6Al-4V aerospace alloy with carbide and PCD tools

  2018cites this paper
• Wear mechanisms of uncoated and coated carbide tools when machining Ti6Al4V using LN2 and cooled N2

  2018cites this paper
• Fatigue Properties of Ti-6Al-4V Titanium Alloy Friction Stir Welding Joint

  2018cites this paper
• Wear mechanisms of uncoated and coated carbide tools when machining Ti6Al4V using LN2 and cooled N2

  2017cites this paper
• Sustainable machining of titanium alloys: A critical review

  2017cites this paper
• Wear mechanisms of WC/Co tools when machining high-strength titanium alloy TB6 (Ti-10V-2Fe-3Al)

  2017cites this paper
• On the mechanism of tool crater wear during titanium alloy machining

  2017influential citation
• Modeling of Ti-6Al-4V machining force considering material microstructure evolution

  2017cites this paper
• Comparative Evaluation of Performances of TiAlN-, AlCrN- and AlCrN/TiAlN-Coated Carbide Cutting Tools and Uncoated Carbide Cutting Tools on Turning EN24 Alloy Steel

  2017cites this paper
• Indirect Monitoring Method of Tool Wear using the Analysis of Cutting Force during Dry Machining of Ti Alloys

  2017cites this paper
• Finite Element Simulations of Micro Turning of Ti-6Al-4V using PCD and Coated Carbide tools

  2017cites this paper
• Modeling of Ti-6Al-4V machining force considering material microstructure evolution

  2017cites this paper
• Investigation of Temperature and Stress Distribution on High Speed Machining of Ti6Al4V and 316L Steel Biomaterials Using Explicit Dynamic Analysis

  2017cites this paper
• Combined effect of resistance spot welding and precipitation hardening on tensile shear load bearing capacity of A286 superalloy

  2017cites this paper
• Wear behaviour of coated carbide tools during machining of Ti6Al4V aerospace alloy associated with strong built up edge formation

  2017cites this paper
• Developments in cutting tool technology in improving machinability of Ti6Al4V alloy: A review

  2016influential citation
• Statistical analysis of process parameters in micromachining of Ti-6Al-4V alloy

  2016cites this paper
• Metallurgical and Machinability Characteristics of Wrought and Selective Laser Melted Ti-6Al-4V

  2016cites this paper
• Molecular dynamics simulation of the diffusion behaviour between Co and Ti and its effect on the wear of WC/Co tools when titanium alloy is machined

  2016cites this paper
• Wear mechanisms of WC/Co tools when machining high-strength titanium alloy TB6 (Ti-10V-2Fe-3Al)

  2016cites this paper
• Design and simulation of thermal residual stresses of coatings on WC-Co cemented carbide cutting tool substrate

  2016cites this paper
• An innovative approach to cutting force modelling in diamond turning and its correlation analysis with tool wear

  2016cites this paper
• Design and simulation of thermal residual stresses of coatings on WC-Co cemented carbide cutting tool substrate

  2016cites this paper