Drop breakup in turbulent stirred‐tank contactors. Part I: Effect of dispersed‐phase viscosity

No abstract is available for this paper.

• Publication year

  1986

• Venue

  Aiche Journal

• Publication date

  1986-04-01

• Fields of study

  Chemistry, Engineering

• Identifiers
  DOI 10.1002/AIC.690320416
• External record

  Open on Semantic Scholar

• Source metadata

  Semantic Scholar

• No claims are published for this paper.

• No concepts are published for this paper.

• No references are available for this paper.

• Hydrodynamic investigation of an inline teethed high shear mixer across fluid viscosity ranges

  2026cites this paper
• Droplet size distribution in a non-reactive styrene–water system for suspension polymerization: coupling effects between tricalcium phosphate and sodium dodecyl benzene sulfonate

  2026cites this paper
• Modeling characteristic size distribution parameters of oil droplets generated by breaking waves.

  2026cites this paper
• A Simplified Droplet Breakage Model to Simulate Continuous Emulsification by Hydrodynamic Cavitation

  2026cites this paper
• Effect of liquid viscosities on droplet dispersion in combined trapezoid spray tray

  2026cites this paper
• Feasibility study on the preparation of monodisperse emulsions using a stirred tank

  2026cites this paper
• Efficient beneficiation mechanism of Microemulsion-Enhanced fine coal Particles: Synergizing dispersion and collision

  2026cites this paper
• Evolution of oil droplet size distributions entrained by breaking waves.

  2025cites this paper
• On the particle kinetics in the synthesis of polymer grains via multiscale simulation of suspension polymerization

  2025cites this paper
• Break-Up of Plant Cell Structures in High Pressure Homogenizers – Prospects and Challenges for Processing of Plant-Based Beverages

  2025cites this paper
• A Low-Cost Method for Characterizing the Inception and Extent of Cavitation in High-Pressure Homogenizers

  2025cites this paper
• Influence of continuous phase viscosity on drop breakup mechanisms in a miniature cubic mixer at moderate Reynolds numbers

  2025cites this paper
• Optimizing Crosslinked Dextran Microspheres: Morphology Control and Particle Size Engineering via Population Balance Modeling and Genetic Algorithm

  2025cites this paper
• Dynamics of droplet breakup symmetrically placed between two collapsing cavities via numerical simulations

  2025cites this paper
• Single drop turbulent breakup in the anisotropic turbulence inside a high-pressure homogenizer scale-up model

  2025cites this paper
• Modeling of drop breakage based on the whole energy spectrum: Considering the effect of dispersed‐phase viscosity

  2025cites this paper
• Current Perspectives on Emulsified Cosmetics: Integration of Artificial Intelligence into Product Design

  2025cites this paper
• Custom-made spherical fluorescent tracer particles for laser Velocimetry Laboratory Experiments

  2024cites this paper
• Micro/nanofluid-based carbon-negative process for capturing CO2 from low-carbon flue gas to produce soda ash: Effects and enhancement mechanisms

  2024cites this paper
• Continuous turbulent liquid-liquid emulsification using open-cell solid foams: experimental investigation and modelling

  2024cites this paper
• Deformation and time scales of drop dynamics in turbulent field and the effect of physical properties

  2024cites this paper
• Modelling W/O/W double emulsions preparation in static mixers: Accounting for the shear-thinning behaviour of the dispersed phase

  2024cites this paper
• Liquid–Liquid Dispersion Performance Prediction and Uncertainty Quantification Using Recurrent Neural Networks

  2024cites this paper
• Experimental and theoretical modeling of droplet break-up of W/O emulsion flow in ESPs

  2024cites this paper
• Mass transfer and hydrodynamic studies in a 100 μm diameter microfluidic channel in a rotated helical configuration

  2024cites this paper
• Characteristics of emulsion preparation in an ultrasonic microreactor: cavitation, droplet size and energy efficiency

  2024cites this paper
• Study of the stability of model emulsions mimicking petroleum with different types of non-ionic surfactants

  2024cites this paper
• A study with PUREX aqueous-organic pair in Taylor-Couette mixing field

  2024cites this paper
• Experimental investigation of single drop breakup in a confined turbulent wall-jet – Effect of Weber number

  2024cites this paper
• The effect of disperse phase viscosity in the emulsification of a semi-dairy beverage–combining emulsification experiments and numerical single drop breakup simulations

  2023cites this paper
• Application of Population Balance Models in Particle-Stabilized Dispersions

  2023cites this paper
• Mass Transfer and Droplet Behaviors in Liquid-Liquid Extraction Process Based on Multi-Scale Perspective: A Review

  2023cites this paper
• One-Dimensional Modeling of Mass Transfer Processes in an Annular Centrifugal Contactor

  2023cites this paper
• CFD-PBM Investigation on Droplet Size Distribution in a Liquid–Liquid Stirred Tank: Effect of Impeller Type

  2023cites this paper
• High-pressure homogenizer valve design modifications allowing intensified drop breakup without increasing power consumption. I. Optimization of current design-principle

  2023cites this paper
• Droplet Size Distribution in Emulsions

  2023cites this paper
• Experimental Characterization and Evaluation of Crude Spiking Influence on Oil/Water Dispersed Flow in Pipe

  2023cites this paper
• Rotor-Stator Emulsification in the Turbulent Inertial Regime: Experiments toward a Robust Correlation for the Droplet Size

  2023cites this paper
• Experimental quantification of the performance of a horizontal multi-pipe bulk separator of water and oil with crude spiking

  2023cites this paper
• Deformation and Breakup of Bubbles and Drops in Turbulence

  2023cites this paper
• On the breakup frequency of bubbles and droplets in turbulence: A compilation and evaluation of experimental data

  2023cites this paper
• MODELLING OF MASS TRANSFER IN A STEELMAKING LADLE

  2023cites this paper
• Towards best practice recommendations for turbulence modelling of high-pressure homogenizer outlet chambers – numerical validation using DNS data

  2022cites this paper
• A criterion for when an emulsion drop undergoing turbulent deformation has reached a critically deformed state

  2022cites this paper
• Droplet size distribution in a biphasic liquid reactor for understanding the impact of various dual impeller designs on the morphology of S-PVC

  2022cites this paper
• Investigation of the Role of Impeller Structural Parameters on Liquid–Liquid Mixing Characteristics in Stirred Tanks

  2022cites this paper
• Numerical study of oil–water emulsion formation in stirred vessels: effect of impeller speed

  2022influential citation
• A hydrodynamic comparisons of two different high-pressure homogenizer valve design principles: a step towards increased efficiency

  2022cites this paper
• Ultrasonic emulsification: basic characteristics, cavitation, mechanism, devices and application

  2022cites this paper
• Deformation and initial breakup morphology of viscous emulsion drops in isotropic homogeneous turbulence with relevance for emulsification devices

  2022cites this paper
• Experimental and numerical modelling of mass transfer in a refining ladle

  2022cites this paper
• 0D Homogeneous Simulation of Droplet Size Evolution in a Turbulent Stirred Tank

  2022cites this paper
• Modeling drop breakage using the full energy spectrum and a specific realization of turbulence anisotropy

  2021cites this paper
• Enhancement of turbulent liquid-liquid dispersions in a round-bottom stirred tank equipped by a flexible impeller

  2021cites this paper
• Impact of a jet orifice on the hydrodynamics and the oil droplet size distribution

  2021cites this paper
• Analysis of the Performance of a High-Speed Scott Turbon Mixer in Immiscible Liquid–Liquid Mixing through Endoscopy, Tomography, CFD, and Statistical Methods

  2021cites this paper
• Structural regulation of poly(urea-formaldehyde) microcapsules containing lube base oil and their thermal properties

  2021cites this paper
• Experimental characterization of dynamic behavior of single bubble breakage in an agitated tank

  2021cites this paper
• Scale up

  2021cites this paper
• The effect of an inline blockage on the formation of a turbulent free jet

  2021cites this paper
• The effect of radial impeller geometry on the link between power and flow numbers

  2021cites this paper
• Single oil drop breakage in water: Impact of turbulence level in channel flow

  2021cites this paper
• The Role of Stochastic Time-Variations in Turbulent Stresses When Predicting Drop Breakup—A Review of Modelling Approaches

  2021cites this paper
• Large eddy simulation and experiment of shear breakup in liquid-liquid jet: Formation of ligaments and droplets

  2021cites this paper
• Encapsulation of hexylsalicylate in an animal-free chitosan-gum arabic shell by complex coacervation

  2021cites this paper
• Scaling of Droplet Breakup in High-Pressure Homogenizer Orifices. Part II: Visualization of the Turbulent Droplet Breakup

  2021cites this paper
• CFD modeling of the turbulent dispersion of liquid droplets in a vessel using a correlation based on local droplet size distribution

  2021cites this paper
• General approach for technology and Process Equipment Assembly (PEA) selection in process design

  2020cites this paper
• Phase Transitions and Separation Time Scales of CO2–Crude Oil Fluid Systems: Wheel Flow Loop Experiments and Modeling

  2020cites this paper
• Coupled population balance and large eddy simulation model for polydisperse droplet evolution in a turbulent round jet

  2020cites this paper
• MODELLING THE EFFECT OF SURFACTANT ON DROPLET

  2020cites this paper
• Application of Eulerian-Eulerian-Lagrangian hybrid model to simulate liquid-liquid drop size distribution in stirred tank reactors

  2020cites this paper
• Modeling oil dispersion under breaking waves. Part II: Coupling Lagrangian particle tracking with population balance model

  2020cites this paper
• A new model of bubble Sauter mean diameter in fine bubble-dominated columns

  2020cites this paper
• Formation of oil-particle aggregates: Particle penetration and impact of particle properties and particle-to-oil concentration ratios.

  2020cites this paper
• Experiments and Modeling for Investigation of Oily Sludge Biodegradation in a Wastewater Pond Environment

  2020cites this paper
• Droplets and Dispersions

  2020cites this paper
• A Review on Multiphase Underwater Jets and Plumes: Droplets, Hydrodynamics, and Chemistry

  2020influential citation
• Predicting Droplet Size Distributions of Emulsions Produced in a Sonolator

  2020cites this paper
• Droplet Size Distributions of Liquid‐Liquid Dispersions in Centrifugal Pumps

  2020cites this paper
• Small Scale Physical and Bio-Chemical Processes Affecting the Transport of Oil after a Spill

  2020cites this paper
• Modeling of an industrial scale hydrodynamic cavitation multiphase reactor for Prileschajew epoxidation

  2020cites this paper
• Transport of Oil Droplets in the Upper Ocean: Impact of the Eddy Diffusivity

  2020cites this paper
• Experimental study on oil droplet breakup under the action of turbulent field in modified concentric cylinder rotating device

  2020cites this paper
• Ultrasonic Method for Online Tracking of Interface and Dispersion Band in Gravity Settlers

  2020cites this paper
• Experimental Study on Deliquification with Atomizing Nozzle in Gas Well

  2020cites this paper
• Energetics of drop and bubble deformation with application to turbulent breakup.

  2020cites this paper
• Integrated design of emulsified cosmetic products: A review

  2020cites this paper
• The choice of droplet size probability distribution function for oil spill modeling is not trivial.

  2020influential citation
• Deformation of drops by outer eddies in turbulence

  2020cites this paper
• An experimental study of immiscible liquid–liquid dispersions in a pump–mixer of mixer–settler

  2020cites this paper
• A mechanistic investigation of cell breakup in tomato juice homogenization

  2020cites this paper
• A rheo-optic study of liquid/liquid systems with varying phases, volume fractions and viscosity ratios

  2020cites this paper
• Effect of dispersed phase feed time on the droplet size of Pickering emulsions produced in a stirred tank

  2020cites this paper
• Prediction of droplet sizes for oil-in-water emulsion systems assisted by ultrasound cavitation: Transient scaling law based on dynamic breakup potential.

  2019cites this paper
• Droplet size distribution and mixing hydrodynamics in a liquid–liquid stirred tank by CFD modeling

  2019cites this paper
• Dual mechanism model for fluid particle breakup in the entire turbulent spectrum

  2019cites this paper
• A population balance model for the prediction of breakage of emulsion droplets in SMX+ static mixers

  2019cites this paper
• CFD-PBM simulations of a pulsed sieve plate column

  2019cites this paper
• Three‐Dimensional Observation of Single Air Bubble Breakup in a Stirred Tank

  2019cites this paper