T. Ishijima

PROFILE

Homepage
No homepage is listed.
ORCID
No ORCID is listed.
Affiliations
No affiliations are listed.
Aliases
T Ishijima, T. Ishijima, Tatsuo Ishijima
Publication record
245 papers · 1,736 citations · H-index 20

PAPERS

Influence of O2 content ratio on the properties of CO2/O2/C4F7N mixtures and arc behaviors. –Equilibrium composition, thermodynamic and transport properties, and arc behavior
20260 citationsauthor #4
Generation of Charged Nanodroplets Incorporating Hydroxyl Radicals by Plasma-assisted Electrospray
20260 citationsauthor #2
Optimization for modulation conditions in nanoparticle synthesis using tandem modulated induction thermal plasmas with intermittent synchronized feeding by machine learning
20251 citationsauthor #5
Mitigation of Vacuum Surface Discharge Development through Electrode Shape Modification and Barrier Implementation
20250 citationsauthor #4
Vacuum Arc Behavior Simulation by Moving Particle Semi-implicit Method + Finite Volume Method with Improved Electron Density Calculation
20250 citationsauthor #4
Carrier gas flow rate effects on additive-assisted low-temperature Y<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si45.svg" display="inline" id="d1e378"><mml:msub><mml:mrow/><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:math>O<mml:math xmlns:mml="http://www.w3.org/1998/M
20250 citationsauthor #8
Comparative analysis of measured and calculated radiation intensities in polymer ablated arcs
20250 citationsauthor #3
Evaluation of Electrical Insulation Properties of High Temperature Gas Heated by Inductively Coupled Thermal Plasma
20243 citationsauthor #5
Fundamental Investigation on Dielectric Recovery Characteristics of Copper Butt Electrode Space for Different Voltage Application Timings during Arc Decay Process
20240 citationsauthor #4
Numerical Simulations of Arc Plasma Interaction with Polymer Wall During Decaying Process of Polymer Vapor Contaminated Arc
20240 citationsauthor #3
Experimental and Numerical Study on Polymer Ablated Arc Characteristics with One Side Flow Outlet Model
20243 citationsauthor #3
Influence of AC Conditioning Treatment on Subsequent Vacuum Surface Flashover Process under Impulse Voltage Application
20241 citationsauthor #4
Measurement of Dielectric Breakdown Properties in High Temperature CO2 Gas Heated by Tandem-Coil Coupled Thermal Plasmas
20240 citationsauthor #5
Numerical Investigation on Influence of Oxygen Ratio in CO2/O2/C4F7N on Thermal Interruption Performance of Arc Extinction
20240 citationsauthor #4
Improvement of Dielectric Strength of Vacuum Interrupter by Installing Barrier on Insulator Surface
20245 citationsauthor #4
Numerical Study on Decaying Arc Characteristics in CO2/C3H2F4 Gas Mixture With Different Gas Mixture Ratios Under Free Recovery Condition
20240 citationsauthor #4
Investigation of Partial Discharge Characteristics inside Vacuum Interrupter with Various Floating Shield Potentials
20240 citationsauthor #4
Development of Numerical Model for Small- Current Vacuum Arc Decay Process Using a Hybrid of Moving Particle Semi-Implicit Method and Finite Volume Method
20242 citationsauthor #4
Partial Discharge Characteristics in a Vacuum Interrupter under Different Shield Potentials
20230 citationsauthor #4
Investigation on Low-Current Vacuum Arc Behavior by Two-Dimensional Spectroscopic Observation and Numerical Modeling using Moving Particle Semi-implicit (MPS) Method
20231 citationsauthor #5
Consistent Calculation from Particle Composition to Arc Simulation for Arc Ignition Process in Polymer Ablated Arcs
20238 citationsauthor #3
Influence of Insulator Barrier on Surface Flashover Development in Vacuum
20231 citationsauthor #4
Helium Plasma Jet Interaction with Different Target Materials and the Plasma Characteristics on the Irradiation Area
20232 citationsauthor #2
Numerical Simulation on Copper Vapor Behavior in Vacuum Arcs during Low-Current and Current Decaying Process using Moving Particle Method
20231 citationsauthor #4
Numerical Simulation on Decaying Arcs in Molecular Gas Flow including C, F and O
20220 citationsauthor #6
Development of a numerical model for metal vapor dynamics in low pressure arcs based on moving particle semi‐implicit method and influence of shield wall radius on vapor behavior
20222 citationsauthor #5
Wound healing in db/db mice with type 2 diabetes using non-contact exposure with an argon non-thermal atmospheric pressure plasma jet device
202211 citationsauthor #3
Influence of Barrier along Insulator Surface on Current Characteristics in Vacuum Surface Discharge under Standard Lightning Impulse Voltage Application
20224 citationsauthor #4
Influence of Time Duration of Intermittent Feedstock Feeding on Si Nanoparticle Synthesis in Modulated Thermal Plasmas
20220 citationsauthor #5
Numerical prediction on arc characteristics for various polymer materials during polymer‐ablated arc ignition process
20221 citationsauthor #3
Numerical Study on Decaying Arcs under Free Recovery Condition in CO2/SF6 Gas Mixture for Various Gas Flow Rates
20220 citationsauthor #5
High Speed Ashing of Ion Implanted Photoresist by Microwave Excited Water Vapor Plasma with Powered Substrate
20221 citationsauthor #7
Comparative Study of Influence of Simultaneous Modulation of Upper-Coil and Lower-Coil Currents on Silicon Nanoparticles Synthesized Using Tandem-Type Modulated Induction Thermal Plasmas
20224 citationsauthor #5
Feedstock feeding duration influence on silicon nanoparticle synthesis using tandem modulated induction thermal plasmas with intermittent feedstock feeding
20224 citationsauthor #4
Comparison of Ablation Characteristics of Polymer- Ablated Arc with Wear Polymer Material
20220 citationsauthor #3
Investigation of Pressure Dependence in Photoresist Ashing Process using Microwave Excited Water Vapor Plasma
20220 citationsauthor #10
Influence of Floating Shield Wall on Dynamic Behavior of Metal Vapor during Arc Sustaining by Moving Particle Semi-implicit (MPS) Simulation
20213 citationsauthor #5
Development of a Numerical Model for Metal Vapor Dynamics in Low Pressure Arcs based on Moving Particle Semi-implicit Method and Influence of Shield Wall Radius on Vapor Behavior
20212 citationsauthor #5
Numerical Study for Influence of Feedstock Feeding Duration on Nanoparticles Synthesis by Modulated Induction Thermal Plasma with Intermittent Feeding Method
20210 citationsauthor #5
Influence of current modulation waveform on polycrystalline diamond film deposition using modulated induction thermal plasmas—numerical and experimental studies
20211 citationsauthor #5
Numerical study of nanoparticle formation in two-coil tandem-type modulated induction thermal plasmas with simultaneous modulation of upper- and lower-coil currents
20218 citationsauthor #5
Measurement of the density and rotational temperature of OH in a saturated water vapor slot-excited microwave plasma
20211 citationsauthor #3
Temporal Variations of Optical Emission Spectra in Microwave-Excited Plasma in Saturated Water Vapor under Reduced Pressure during Photoresist Removal
20212 citationsauthor #3
High-rate Deposition of Polycrystalline Diamond Film Using Time-series Exposure of Modulated/Non-modulated Induction Thermal Plasmas at Different Flow Rates of Carbon Source Gas
20210 citationsauthor #6
Numerical Prediction on Arc Characteristics for Various Polymer Materials during Polymer-Ablated Arc Ignition Process
20213 citationsauthor #3
Effect of Large Modulation in Lower Coil Current on Nanopowder Synthesis by Two-Coil Tandem Modulated Induction Thermal Plasmas
20210 citationsauthor #5
Accelerated healing of chronic wound under the combinatorial therapeutic regimen based on contact and non-contact styles of the cold atmospheric plasma jet
20212 citationsauthor #9
Reduced effectiveness of plasma jet with natural product of Binahong (Anredera cordifolia) for acute wound healing
20210 citationsauthor #12
Two-Dimensional Spectroscopy for Vacuum Arc in Steady State and Decaying State under Free-Recovery Condition
20213 citationsauthor #6
Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor
20216 citationsauthor #3
Improved Uniformity of Photoresist Ashing for a Half-Inch Wafer with Double U-shaped Antenna Structure in a Microwave-Excited Water Vapor Plasma
20213 citationsauthor #7
Development of a Numerical Model on Metallic Vapor Behavior in Vacuum Arc Based on Moving Particle Semi-implicit Method and Finite Volume Method
20214 citationsauthor #5
Effect of Intermittent Injection of Ar/CH4 Quenching Gas on Particle Composition and Size of Si/C Nanoparticles Synthesized by Modulated Induction Thermal Plasma
20219 citationsauthor #5
Numerical study of polymer-ablation arc with polyacrylic acid + H2O mixture
20211 citationsauthor #4
Nanoparticle synthesis using two-coil tandem-type modulated induction thermal plasmas
20216 citationsauthor #5
Experimental Study on Re‐ignition Process in CO2/C2F6 Gas Mixture Flow after Application of Quasi‐Transient Recovery Voltage
20211 citationsauthor #4
Three-Dimensional Two-Temperature Modeling of Ar Loop-Type Inductively Coupled Thermal Plasma for Surface Modification
20203 citationsauthor #5
Plasma Jet Effectiveness Alteration in Acute Wound Healing by Binahong (Anredera cordifolia) Extract
20201 citationsauthor #12
Imaging of Feedstock Particle Dynamics in Thermal Plasma for Nanoparticle Sythesis by Laser-Strobe Measurement
20200 citationsauthor #6
Observation system of molten steel behavior on plasma arc cutting surface
20203 citationsauthor #5
Numerical study on the evaporation process of feedstock powder under transient states in pulse-modulated induction thermal plasmas for nanoparticle synthesis
202016 citationsauthor #6
Numerical thermofluid simulation on tandem type of induction thermal plasmas with and without current modulation in a lower coil
202011 citationsauthor #5
Correlation of OH Radical and Ashing Uniformity in Microwave Excited Water Vapor Plasma Ashing
20200 citationsauthor #4
High rate synthesis of graphene-encapsulated silicon nanoparticles using pulse-modulated induction thermal plasmas with intermittent feedstock feeding
202011 citationsauthor #6
Numerical Thermofluid Simulation of Decaying Arc Behavior in CO2/O2/C5F10O (C5-PFK) and CO2/C4F7N(C4-PFN) Considering More Than Nona-atomic Molecules
20191 citationsauthor #5
Effects of dielectric properties on electrical characteristics of dielectric barrier discharge generated by low frequency uni-polar high voltage pulses
20197 citationsauthor #4
Numerical Thermofluid Simulation on 10 kA-class High Current Fault Arcs in Air Contaminated with Metal Vapor from Evaporation of Metal Electrodes in Open Air
20190 citationsauthor #5
Investigation of uniform microwave plasma generation excited by slot antenna using electromagnetic field simulation
20191 citationsauthor #3
When plasma jet is effective for chronic wound bacteria inactivation, is it also effective for wound healing?
201925 citationsauthor #13
Numerical thermofluid simulation of high current air arcs at fault point contaminated with metal vapor from evaporation of metal electrode in open air
20190 citationsauthor #4
Progress and perspectives in dry processes for leading-edge manufacturing of devices: toward intelligent processes and virtual product development
201911 citationsauthor #19
Thin film deposition method for ZnO nanosheets using low-temperature microwave-excited atmospheric pressure plasma jet
20193 citationsauthor #10
Thermodynamic and Transport Characteristics of High Temperature Atmospheric Air Arcs containing Two Different Metal Vapor of Cu, Fe and Al
20190 citationsauthor #4
Influence of input power in Ar/H2 thermal plasma with silicon powder by numerical simulation
20191 citationsauthor #4
Numerical thermofluid simulation of a decaying arc behavior in CO2/O2/C5F10O (C5‐PFK) considering more than nona‐atomic molecules
20197 citationsauthor #4
Numerical study of temperature and gas flow fields in Ar–O2 tandem-type inductively coupled thermal plasma with Ti feedstock powder injection
20198 citationsauthor #5
Progress and perspectives in dry processes for nanoscale feature fabrication: fine pattern transfer and high-aspect-ratio feature formation
201924 citationsauthor #19
Ethanolic extract of the natural product of Daun sirih (Piper betle) leaves may impede the effectiveness of the plasma jet contact style for acute wounds
201913 citationsauthor #12
Progress and perspectives in dry processes for emerging multidisciplinary applications: how can we improve our use of dry processes?
20193 citationsauthor #19
Rethinking surface reactions in nanoscale dry processes toward atomic precision and beyond: a physics and chemistry perspective
201915 citationsauthor #2
Numerical parametric investigation on the temperature distribution in Ar/O2 induction thermal plasmas with Ti powder injection: Inclusion of particle evaporation
20193 citationsauthor #4
Numerical Modelling of Vapor Dynamics in Vacuum Arcs between Electrodes with Metal Shield Wall using Moving Particle Method
20193 citationsauthor #5
Polycrystalline diamond film fabrication using modulated inductively coupled thermal plasmas at different pressure conditions
20194 citationsauthor #6
Spatial distribution of Ti vapor admixture ratio in Ar induction thermal plasma torch during Ti feedstock injection
201810 citationsauthor #6
Study the effect of plasma jet on the gas dynamic at the jet-substrate contact surface
20180 citationsauthor #3
Influences of operating conditions of surface dielectric barrier discharge on the decomposition of gaseous naphthalene
20180 citationsauthor #2
Estimation on spatial distribution of number density of TiO molecule in the thermal plasma during Fe 3+ -doped TiO 2 nanopowder synthesis using induction thermal plasmas
20180 citationsauthor #7
Systematic investigation of the effect of N2 admixture ratio on barrier discharge in helium
20188 citationsauthor #2
Influence of sheath gas flow rate in Ar induction thermal plasma with Ti powder injection on the plasma temperature by numerical calculation
20186 citationsauthor #3
Dry Process
20180 citationsauthor #4
Influence of coil current modulation on polycrystalline diamond film deposition by irradiation of Ar/CH4/H2 inductively coupled thermal plasmas
20189 citationsauthor #5
Free radical generation by non-equilibrium atmospheric pressure plasma in alcohol–water mixtures: an EPR-spin trapping study
201819 citationsauthor #8
Progress in nanoscale dry processes for fabrication of high-aspect-ratio features: How can we control critical dimension uniformity at the bottom?
201856 citationsauthor #3
Thermal re-ignition processes of switching arcs with various gas-blast using voltage application highly controlled by powersemiconductors
20187 citationsauthor #5
Influence of Pulse Modulation on Microwave Excited Plasma Production Using Water as a Source Gas
20180 citationsauthor #4
Development and characterization of a wire-plate air bubbling plasma for wastewater treatment using nanosecond pulsed high voltage
201818 citationsauthor #2
Numerical simulation on thermal plasma temperature field in the torch for different conditions
20185 citationsauthor #4
Comparative study on Manuka and Indonesian honeys to support the application of plasma jet during proliferative phase on wound healing
201818 citationsauthor #6
Two-dimensional estimation of number density distribution of precursor molecules during TiO2 nanopowder synthesis using induction thermal plasmas
20180 citationsauthor #7
High-Rate Synthesis of Si/C Nanoparticles using Pulse-Modulated Induction Thermal Plasmas with Intermittent Feeding of Feedstock
20180 citationsauthor #7

TIMELINE

1997 20 citations

1998 2 citations

1999 86 citations

2001 103 citations

2005 2 citations

2006 2 citations

2007 126 citations

2008 7 citations

2009 39 citations

2010 73 citations

2011 44 citations

2012 64 citations

2013 139 citations

2014 162 citations

2015 80 citations

2016 172 citations

2017 82 citations

2018 251 citations

2019 129 citations

2020 45 citations

2021 55 citations

2022 27 citations

2023 13 citations

2024 14 citations

2025 1 citations

2026 0 citations

T. Ishijima

PROFILE

PAPERS

TIMELINE

COAUTHOR MAP

CONCEPT FOOTPRINT