SCIENCE@home

Dynamic Voltage and Frequency Scaling in NoCs with Supervised and Reinforcement Learning Techniques

Quintin Fettes,Mark Clark,Razvan C. Bunescu,Avinash Karanth,A. Louri

Published 2019 in IEEE transactions on computers

ABSTRACT

Network-on-Chips (NoCs) are the de facto choice for designing the interconnect fabric in multicore chips due to their regularity, efficiency, simplicity, and scalability. However, NoC suffers from excessive static power and dynamic energy due to transistor leakage current and data movement between the cores and caches. Power consumption issues are only exacerbated by ever decreasing technology sizes. Dynamic Voltage and Frequency Scaling (DVFS) is one technique that seeks to reduce dynamic energy; however this often occurs at the expense of performance. In this paper, we propose LEAD Learning-enabled Energy-Aware Dynamic voltage/frequency scaling for multicore architectures using both supervised learning and reinforcement learning approaches. LEAD groups the router and its outgoing links into the same V/F domain and implements proactive DVFS mode management strategies that rely on offline trained machine learning models in order to provide optimal V/F mode selection between different voltage/frequency pairs. We present three supervised learning versions of LEAD that are based on buffer utilization, change in buffer utilization and change in energy/throughput, which allow proactive mode selection based on accurate prediction of future network parameters. We then describe a reinforcement learning approach to LEAD that optimizes the DVFS mode selection directly, obviating the need for label and threshold engineering. Simulation results using PARSEC and Splash-2 benchmarks on a 4 × 4 concentrated mesh architecture show that by using supervised learning LEAD can achieve an average dynamic energy savings of 15.4 percent for a loss in throughput of 0.8 percent with no significant impact on latency. When reinforcement learning is used, LEAD increases average dynamic energy savings to 20.3 percent at the cost of a 1.5 percent decrease in throughput and a 1.7 percent increase in latency. Overall, the more flexible reinforcement learning approach enables learning an optimal behavior for a wider range of load environments under any desired energy versus throughput tradeoff.

PUBLICATION RECORD

CITATION MAP

EXTRACTION MAP

CLAIMS

  • No claims are published for this paper.

CONCEPTS

  • No concepts are published for this paper.

REFERENCES

Showing 1-52 of 52 references · Page 1 of 1

CITED BY

Showing 1-65 of 65 citing papers · Page 1 of 1